M1A3P1000-1PG208M View Datasheet(PDF) - Actel Corporation

Part Name

Description

Manufacturer

M1A3P1000-1PG208M

Military ProASIC3/EL Low-Power Flash FPGAs with Flash*Freeze Technology

Actel Corporation 

Military ProASIC3/EL Device Family Overview

Datasheet Categories

Categories

In order to provide the latest information to designers, some datasheets are published before data

has been fully characterized. Datasheets are designated as "Product Brief," "Advance,"

"Preliminary," and "Production." The definition of these categories are as follows:

Product Brief

The product brief is a summarized version of a datasheet (advance or production) and contains

general product information. This document gives an overview of specific device and family

information.

Advance

This version contains initial estimated information based on simulation, other products, devices, or

speed grades. This information can be used as estimates, but not for production. This label only

applies to the DC and Switching Characteristics chapter of the datasheet and will only be used

when the data has not been fully characterized.

Preliminary

The datasheet contains information based on simulation and/or initial characterization. The

information is believed to be correct, but changes are possible.

Unmarked (production)

This version contains information that is considered to be final.

Export Administration Regulations (EAR)

The products described in this document are subject to the Export Administration Regulations

(EAR). They could require an approved export license prior to export from the United States. An

export includes release of product or disclosure of technology to a foreign national inside or

outside the United States.

Actel Safety Critical, Life Support, and High-Reliability

Applications Policy

The Actel products described in this advance status document may not have completed Actel’s

qualification process. Actel may amend or enhance products during the product introduction and

qualification process, resulting in changes in device functionality or performance. It is the

responsibility of each customer to ensure the fitness of any Actel product (but especially a new

product) for a particular purpose, including appropriateness for safety-critical, life-support, and

other high-reliability applications. Consult Actel’s Terms and Conditions for specific liability

exclusions relating to life-support applications. A reliability report covering all of Actel’s products is

available on the Actel website at http://www.actel.com/documents/ORT_Report.pdf. Actel also

offers a variety of enhanced qualification and lot acceptance screening procedures. Contact your

local Actel sales office for additional reliability information.

1-8

v1.0

Share Link: