Philips Semiconductors
Stereo Continuous Calibration DAC
(CC-DAC)
Preliminary specification
TDA1311A
FEATURES
• Voltage output
• Space saving packages SO8 or DIP8
• Low power consumption
• Wide dynamic range (16-bit resolution)
• Continuous Calibration (CC) concept
• Easy application:
– single 4 to 5.5 V rail supply
– output current and bias current are proportional to the
supply voltage
– integrated current-to-voltage converter
• Fast settling time permits 2, 4 and 8 × oversampling
(serial input) or double-speed operation at
4 × oversampling
• Internal bias current ensures maximum dynamic range
• Wide operating temperature range (−40 °C to +85 °C)
• Compatible with most current Japanese input formats:
time multiplexed, two's complement, TTL
• No zero-crossing distortion
• Cost efficient.
GENERAL DESCRIPTION
The TDA1311A; AT is a voltage-driven digital-to-analog
converter and is new generation of DAC devices which
embodies the innovative technique of Continuous
Calibration (CC). The largest bit-currents are repeatedly
generated by one single current reference source. This
duplication is based upon an internal charge storage
principle which has an accuracy insensitive to ageing,
temperature matching and process variations.
The TDA1311A; AT is fabricated in a 1.0 µm CMOS
process and features an extremely low-power dissipation,
small package size and easy application. Furthermore, the
accuracy of the intrinsic high coarse-current combined
with the implemented symmetrical offset decoding method
preclude zero-crossing distortion and ensures high quality
audio reproduction. Therefore, the CC-DAC is eminently
suitable for use in (portable) digital audio equipment.
ORDERING INFORMATION
TYPE
NUMBER
TDA1311A
TDA1311AT
NAME
DIP8
SO8
PACKAGE
DESCRIPTION
plastic dual in-line package; 8 leads (300 mil)
plastic small outline package; 8 leads; body width 3.9 mm
VERSION
SOT97-1
SOT96-1
1995 Dec 18
2