Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

FM25D04C-1ACB2R Просмотр технического описания (PDF) - FIDELIX

Номер в каталоге
Компоненты Описание
FM25D04C-1ACB2R Datasheet PDF : 61 Pages
First Prev 21 22 23 24 25 26 27 28 29 30 Next Last
11.2.6 Write Disable (04h)
The Write Disable instruction (Figure 6) resets the Write Enable Latch (WEL) bit in the Status
Register to a 0. The Write Disable instruction in entered by driving /CS low, shifting the instruction
code “04h” into the DI pin and then driving /CS high. Note that the WEL bit is automatically reset
after Power-up and upon completion of the Write Status Register, Page Program, Sector Erase,
Block Erase and Chip Erase instructions.
/ CS
Mode 3
CLK Mode 0
0 1 2 3 4 5 6 7 Mode 3
Mode 0
Instruction (04 h)
High Impedance
Figure 6. Write Disable Instruction Sequence Diagram
11.2.7 Read Status Register-1 (05h) and Read Status Register-2 (35h)
The Read Status Register instructions allow the 8-bit Status Register to be read, The instruction is
entered by driving /CS low and shifting the instruction code “05h” for Status Register-1 and “35h”
for Status Register-2 into the DI pin on the rising edge of CLK. The status register bits are then
shifted out on the DO pin at the falling edge of CLK with most significant bit (MSB) first as shown in
figure 7. The Status Register bits are shown in figure 3a and 3b include the BUSY, WEL, BP2-BP0,
TB, SEC, SRP0, SRP1 and QE bits (see description of the Status Register earlier in this
The Status Register instruction may be used at any time, even while a Program, Erase, Write
Security Register or Write Status Register cycle is in progress. This allows the BUSY status bit to
be checked to determine when the cycle is complete and if the device can accept another
instruction. The Status Register can be read continuously, as shown in Figure 7. The instruction is
completed by driving /CS high.
Mode 3
Mode 0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Instruction(05h or 35h)
Status Register out
Status Register out
7 65 4 321 07 65 4 321 0 7
Figure 7. Read Status Register Instruction Sequence Diagram
preliminary(Aug.18.2010) 21
Direct download click here


Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]