Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

VKA75LS02C 查看數據表(PDF) - Murata Power Solutions

零件编号产品描述 (功能)生产厂家
VKA75LS02C 75 watt single output half brick DC/DC converter Murata-ps
Murata Power Solutions Murata-ps
VKA75LS02C Datasheet PDF : 4 Pages
1 2 3 4
0.530 MAX
[13.46]
0.20 [5.1]
0.20 [5.1]
0.50 [12.7]
0.40 [10.16]
2.000
[50.80]
1.000
[25.40]
2.40
[61.0]
MAX
1.400
[35.56]
.040 [1.02] DIA.
7 PLACES
MECHANICAL
.081 [2.06] DIA.
2 PLACES
VKA75xSC Series
75 Watt Single Output Half Brick DC/DC Converter
NOTES:
All dimensions are in inches (millimeters).
PIN PLACEMENT TOLERANCE: ± 0.005”
MECHANICAL TOLERANCE: ± 0.015”
Marked with: specific modeL ordered, date code, job code.
MATERIAL: Units are encapsulated in a low thermal resistance
molding compound which has excellent chemical resistance
and electrical properties in high humidity environments and
over a wide operating temperature range. The encapsulant
and outer shell of the unit have UL94V-0 ratings. Lead material
is brass; lead finish is matte tin (100-300 micro-inches) over a
nickel barrier layer (5-40 micro-inches).”
VKA75xSC
.400 [10.16]
0.700
[17.78]
1.000
[25.40]
1.400
[35.56]
0.19 [4.8]
1.900
[48.26]
2.28
[57.91]
MAX
MOUNTING INSERTS M3 X 0.5 THRU, 4 PLACES
MAX. TORQUE, 8 IN/LBS
OUTPUT ADJUST VOLTAGE
This feature allows the user to accurately adjust the module’s
output voltage set point to a specified level. This is achieved
by connecting a resistor or potentiometer from the TRIM
terminal to either the +Vout terminal (for increased Vout) or
the -Vout terminal (for decreased Vout). The formulae below
describe the trim resistor value to obtain a Vout change of
Δ%. VO is output voltage prior to adjustment (3.3V, 5V, 12V,
15V, or 24V).
( ) Radj - up = Vo(100 + Δ%) _ (100 + 2Δ%) Ω
1.225Δ%
Δ%
( ) Radj - down = 100Δ-%2 Ω
OVP NOTE
Special attention should be given to the peak voltage
deviation during a dynamic load step when trimming the
output above the original set point to avoid tripping the
overvoltage protection circuit. Should an OVP condition
occur, the converter will go into a latch condition and
must be externally reset before it will return to normal
operation.
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356
www.murata-ps.com email: sales@murata-ps.com ISO 9001 REGISTERED
03/04/08
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
notice.
© 2008 Murata Power Solutions, Inc.
www.murata-ps.com
USA: Tucson (Az), Tel: (800) 547 2537, email: sales@murata-ps.com
Canada: Toronto, Tel: (866) 740 1232, email: toronto@murata-ps.com
UK:
Milton Keynes, Tel: +44 (0)1908 615232, email: mk@murata-ps.com
France: Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: france@murata-ps.com
Germany: München, Tel: +49 (0)89-544334-0, email: munich@murata-ps.com
Japan:
Tokyo, Tel: 3-3779-1031, email: sales_tokyo@murata-ps.com
Osaka, Tel: 6-6354-2025, email: sales_osaka@murata-ps.com
Website: www.murata-ps.jp
China: Shanghai, Tel: +86 215 027 3678, email: shanghai@murata-ps.com
Guangzhou, Tel: +86 208 221 8066, email: guangzhou@murata-ps.com
Technical enquiries - email: mk@murata-ps.com, tel: +44 (0)1908 615232
MCD_VKA75C Series.D01 Page 4 of 4
Direct download click here

 

Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2020  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]