DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

74HCT174-Q100 View Datasheet(PDF) - NXP Semiconductors.

Part Name
Description
Manufacturer
74HCT174-Q100 Datasheet PDF : 16 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
74HC174-Q100; 74HCT174-Q100
Hex D-type flip-flop with reset; positive-edge trigger
Rev. 1 — 17 April 2013
Product data sheet
1. General description
The 74HC174-Q100; 74HCT174-Q100 are hex positive edge-triggered D-type flip-flops
with individual data inputs (Dn) and outputs (Qn). The common clock (CP) and master
reset (MR) inputs load and reset all flip-flops simultaneously. The D-input that meets the
set-up and hold time requirements on the LOW-to-HIGH clock transition is stored in the
flip-flop and appears at the Q output. A LOW on MR causes the flip-flops and outputs to
be reset LOW. Inputs include clamp diodes. This enables the use of current limiting
resistors to interface inputs to voltages in excess of VCC.
This product has been qualified to the Automotive Electronics Council (AEC) standard
Q100 (Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
Automotive product qualification in accordance with AEC-Q100 (Grade 1)
Specified from 40 C to +85 C and from 40 C to +125 C
Input levels:
For 74HC174-Q100: CMOS level
For 74HCT174-Q100: TTL level
Six edge-triggered D-type flip-flops
Asynchronous master reset
Complies with JEDEC standard no. 7A
ESD protection:
MIL-STD-883, method 3015 exceeds 2000 V
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 )
Multiple package options
3. Ordering information
Table 1. Ordering information
Type number
Package
Temperature range Name
74HC174D-Q100 40 C to +125 C SO16
74HCT174D-Q100
74HC174PW-Q100 40 C to +125 C TSSOP16
74HCT174PW-Q100
Description
Version
plastic small outline package; 16 leads; body width SOT109-1
3.9 mm
plastic thin shrink small outline package; 16 leads; SOT403-1
body width 4.4 mm
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]