DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

74ABT126D/AUJ View Datasheet(PDF) - NXP Semiconductors.

Part Name
Description
Manufacturer
74ABT126D/AUJ
NXP
NXP Semiconductors. NXP
74ABT126D/AUJ Datasheet PDF : 15 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Philips Semiconductors
74ABT126
Quad buffer; 3-state
Table 7: Static characteristics …continued
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
VOH
HIGH-level output voltage
VOL
LOW-level output voltage
ILI
IOFF
IPU, IPD
IOZ
input leakage current
power-off leakage current
power-up or power-down
down 3-state output current
3-state output current
ICEX
output HIGH-state leakage
current
VCC = 4.5 V; VI = VIL or VIH
IOH = 3 mA
IOH = 32 mA
VCC = 5.0 V; VI = VIL or VIH
IOH = 3 mA
VCC = 4.5 V; VI = VIL or VIH
IOL = 64 mA
VCC = 5.5 V; VI = GND or 5.5 V
VCC = 0.0 V; VO or VI 4.5 V
VCC = 2.1 V; VO = 0.5 V; VI = GND or VCC;
VnOE = don’t care
VCC = 5.5 V; VI = VIL or VIH
output HIGH-state at VO = 2.7 V
output LOW-state at VO = 0.5 V
VCC = 5.5 V; VO = 5.5 V; VI = GND or VCC
IO
output current
VCC = 5.5 V; VO = 2.5 V
ICC
quiescent supply current
VCC = 5.5 V; VI = GND or VCC
outputs HIGH-state
outputs LOW-state
outputs 3-state
ICC
additional supply current
per data input pin
one data input at 3.4 V and other inputs at
VCC or GND; VCC = 5.5 V
outputs enabled
outputs 3-state
per enable input pin
one enable input at 3.4 V and other inputs at
VCC or GND; VCC = 5.5 V
outputs 3-state
Min Typ Max Unit
2.5 -
-
V
2.0 -
-
V
3.0 -
-
V
-
-
0.55 V
-
-
±1.0 µA
-
-
±100 µA
[1] -
-
±50 µA
-
-
-
-
-
-
[2] 50 -
-
-
-
-
-
-
[3]
-
-
-
-
[3]
-
-
50 µA
50 µA
50 µA
180 mA
250 µA
15 mA
250 µA
1.5 mA
250 µA
1.5 mA
[1] This parameter is valid for any VCC between 0 V and 2.1 V, with a transition time of up to 10 ms. From VCC = 2.1 V to VCC = 5 V ± 10 %
a transition time of up to 100 µs is permitted.
[2] Not more than one output should be tested at a time, and the duration of the test should not exceed one second.
[3] This is the increase in supply current for each input at 3.4 V.
9397 750 14597
Product data sheet
Rev. 04 — 17 February 2005
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
6 of 15
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]