Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

74HC5555 View Datasheet(PDF) - NXP Semiconductors.

Part NameDescriptionManufacturer
74HC5555 Programmable delay timer with oscillator NXP
NXP Semiconductors. NXP
74HC5555 Datasheet PDF : 23 Pages
First Prev 21 22 23
Philips Semiconductors
Programmable delay timer with oscillator
Product specification
74HC/HCT5555
Minimum Output Pulse Width
The minimum output pulse width is
determined by the minimum clock
pulse width, plus the maximum
propagation delay of A, B to Q. The
rising edge of Q is dominated by the
A, B to Q propagation delay, while the
falling edge of Q is dominated by RS
to Q propagation delay. These
propagation delays are not equal. The
RS to Q propagation delay is some
what longer, resulting in inaccurate
outputs for extremely short pulses.
The propagation delays are listed in
the section 'AC Characteristics'. With
these numbers it is possible to
calculate the maximum deviation (an
example is shown in Fig.16).
Figure 16 is valid for an external clock
where the trigger is synchronized to
the falling edge of the clock only. The
graph shows that the minimum
programmed pulse width of 100 ns is:
minimum of 4% too long
typically 7% too long
maximum of 10% too long.
SYNCHRONIZATION LIMITS
NUMBER OF STAGES SELECTED
1
2
3
4
5
6
7
8
.
17
18
19
20
21
22
23
24
18 MHz
14 MHz
11 MHz
9.6 MHz
8.3 MHz
7.3 MHz
6.6 MHz
6 MHz
.
3.2 MHz
3.0 MHz
2.9 MHz
2.8 MHz
2.7 MHz
2.6 MHz
2.5 MHz
2.4 MHz
CLOCK FREQUENCY (TYPICAL)
September 1993
22
Direct download click here

 

Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2020  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]