M1A3P400-2FGG144PP View Datasheet(PDF) - Unspecified
Part Name
Description
Manufacturer
M1A3P400-2FGG144PP Datasheet PDF : 196 Pages
| |||
ProASIC3 DC and Switching Characteristics
Table 2-2 • Recommended Operating Conditions
Symbol
TA
VCC
VJTAG
VPUMP
Parameter
Ambient temperature
1.5 V DC core supply voltage
JTAG DC voltage
Programming voltage
Programming Mode
Operation3
Commercial
0 to +70 4,6
1.425 to 1.575
1.4 to 3.6
3.15 to 3.45
0 to 3.6
Industrial
–40 to +85 5,6
1.425 to 1.575
1.4 to 3.6
3.15 to 3.45
0 to 3.6
Units
°C
V
V
V
V
VCCPLL
VCCI and VMV
Analog power supply (PLL)
1.5 V DC supply voltage
1.8 V DC supply voltage
1.4 to 1.6
1.4 to 1.6
V
1.425 to 1.575 1.425 to 1.575 V
1.7 to 1.9
1.7 to 1.9
V
2.5 V DC supply voltage
2.3 to 2.7
2.3 to 2.7
V
3.3 V DC supply voltage
3.0 to 3.6
3.0 to 3.6
V
LVDS/BLVDS/M-LVDS differential I/O
2.375 to 2.625 2.375 to 2.625 V
LVPECL differential I/O
3.0 to 3.6
3.0 to 3.6
V
Notes:
1. The ranges given here are for power supplies only. The recommended input voltage ranges specific to each
I/O standard are given in Table 2-14 on page 2-17. VMV and VCCI should be at the same voltage within a
given I/O bank.
2. All parameters representing voltages are measured with respect to GND unless otherwise specified.
3. VPUMP can be left floating during operation (not programming mode).
4. Maximum TJ = 85 °C.
5. Maximum TJ = 100 °C.
6. To ensure targeted reliability standards are met across ambient and junction operating temperatures, Actel
recommends that the user follow best design practices using Actel’s timing and power simulation tools.
Table 2-3 • Flash Programming Limits – Retention, Storage and Operating Temperature1
Product Grade
Commercial
Programming Program Retention
Cycles
(biased/unbiased)
500
20 years
Maximum Storage
Temperature TSTG (°C) 2
110
Maximum Operating
Junction Temperature TJ (°C) 2
100
Industrial
500
20 years
110
100
Notes:
1. This is a stress rating only; functional operation at any condition other than those indicated is not implied.
2. These limits apply for program/data retention only. Refer to Table 2-1 on page 2-1 and Table 2-2 for device
operating conditions and absolute limits.
2-2
v1.1
|
|
Share Link: 