DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

MCR006YRTD100_15 View Datasheet(PDF) - ROHM Semiconductor

Part Name
Description
Manufacturer
MCR006YRTD100_15
ROHM
ROHM Semiconductor ROHM
MCR006YRTD100_15 Datasheet PDF : 7 Pages
1 2 3 4 5 6 7
MCR series < Not for Automotive application >
Datasheet
Derating Curve
When the ambient temperature exceeds 70°C, power dissipation must be adjusted according to the derating curves below.
MCR006 / 100
100
MCR01 / 03 / 10 / 18 / 25 / 50
100
80
80
60
60
40
40
20
20
0
55
0
70 100 125
AMBIENT TEMPERATURE (°C)
0
55
0
70 100
155
AMBIENT TEMPERATURE (°C)
Characteristics
Test Items
Guaranteed Value
Resistor Type
Jumper Type
Test Conditions
Resistance
See "Products List"
20°C
Variation of resistance
with temperature
See "Products List"
Measurement : +20 / 55 / +20 / +125°C
Overload
± (2.0%+0.1Ω)
Max. 50mΩ
Test voltage is the smaller one of 1 or 2
1 Rated voltage (current) ×2.5, 2s.
2 Maximum overload voltage
Solderability
A new uniform coating of minimum of
95% of the surface being immersed
and no soldering damage.
Rosin·Ethanol : 25% (Weight)
Soldering condition : 235±5°C
Duration of immersion : 2.0±0.5s
Resistance to
soldering heat
Rapid change of
temperature
± (1.0%+0.05Ω)
Max. 50mΩ
No remarkable abnormality on the appearance.
± (1.0%+0.05Ω)
Max. 50mΩ
Soldering condition : 260±5°C
Duration of immersion : 10±1s
Test temp.
55°C to +125°C 100cycle (MCR006)
55°C to +125°C 300cycle (MCR01)
55°C to +125°C 5cycle (MCR03 / 10 / 18 / 25 / 50 / 100)
Damp heat, steady state
± (3.0%+0.1Ω)
Max. 100mΩ
40°C, 93%RH (Relative Humidity)
Test time : 1,000h to 1,048h
Endurance at 70°C
Endurance
± (3.0%+0.1Ω)
Max. 100mΩ
± (3.0%+0.1Ω)
Max. 100mΩ
70°C
Rated voltage (current)
1.5h : ON 0.5h : OFF
Test time : 1,000h to 1,048h
125°C (MCR006 / 25 / 50 / 100)
155°C (MCR01 / 03 / 10 / 18)
Test time : 1,000h to 1,048h
Resistance to solvent
± (1.0%+0.05Ω)
Max. 50mΩ
23±5°C, Immersion cleaning, 5±0.5min
Solvent : 2propanol
Bend strength of
the end face plating
± (1.0%+0.05Ω)
Max. 50mΩ
Without mechanical damage such as breaks.
Maximum overload voltage Test voltage
MCR006
50V
MCR01
100V
MCR03
100V
MCR10
200V
MCR18
400V
MCR025
400V
MCR50
400V
MCR100
400V
Compliance Standard(s) : IEC601158
JISC 52018
www.rohm.com
c 2015 ROHM Co., Ltd. All rights reserved.
4/6
2015.02 - Rev.F
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]