Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

901-128-11(QPL) Ver la hoja de datos (PDF) - Amphenol Aerospace

Número de piezacomponentes DescripciónFabricante
901-128-11(QPL) SMA Connectors Amphenol
Amphenol Aerospace Amphenol
901-128-11(QPL) Datasheet PDF : 16 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
SMA
Stainless Steel SMA Specifications
Electrical
Impedance
50 Ω
Frequency range
DC - 18 GHz (semi-rigid cable)
DC - 12.4 GHz (flexible cable)
RF-leakage
100 dB-f minimum @ 3 GHz (semi-rigid cable)
60 dB minimum @ 3 GHz (flexible cable)
Voltage rating (at sea level)
≤ 500 Vrms (semi-rigid, depending on cable)
≤ 335 Vrms (flexible, depending on cable)
Contact resistance
center contact: ≤ 2 mΩ
outer contact: ≤ 2 mΩ
braid to body: ≤ 0.5 mΩ
Insulation resistance
5,000 MΩ minimum
Insertion loss maximum
dB maximum = .03 √ f(GHz)
Dielectric withstanding voltage
1,500 Vrms (semi-rigid cable, at sea level)
1,000 Vrms (flexible cable, at sea level)
Mechanical
Mating
Coupling torque
N-cm)
Coupling nut retention force
Braid/Jacket cable affixment
Center conductor cable affixment
Captivated contacts
Durability (matings)
.250-36 threaded coupling
15 in-lbs (22 / 170 N-cm) max, recom. 7 / 10 in-lbs (80 / 110
100 in-lbs (300 N-cm) min.
Crimp and solder types
Solder, unless noted otherwise
All types, unless noted otherwise
500 cycles minimum
Environmental
Temperature range
Weatherproof
Thermal shock
Moisture resistance
Corrosion
Vibration
Mechanical shock
Altitude
-65°C to +165°C
crimp: w/ heat shrink tubing, solder: w/ gasket
MIL-STD-202, method 107, cond. B
MIL-STD-202, method 106 (except step 7b)
MIL-STD-202, method 101, cond. B
MIL-STD-202, method 204, cond. D
MIL-STD-202, method 213, cond. 1
MIL-STD-202, method 105, cond. C (n/a 70,000 ft)
Note: These characteristics are typical but may not apply to all connectors.
Amphenol® RF: 800-627-7100
SMA
61
Direct download click here

 

Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2019  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]