T107KCFABE View Datasheet(PDF) - C and K Components

Part Name

Description

Manufacturer

T107KCFABE

T Series Subminiature Toggle Switches

C and K Components 

T Series

Subminiature Toggle Switches

Features/Benefits

• Compact size—small footprint

• Single and double pole models

• PC and panel mount

options available

• RoHS compliant models available

Typical Applications

• Hand-held telecommunications

• Instrumentation

• Medical equipment

Specifications

CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or

DC max. Q contact material (TX01 models): 3 AMPS @

120 V AC or 28 V DC. All other models: 2 AMPS @

120 V AC or 28 V DC. See page F-42 for additional ratings.

ELECTRICAL LIFE: TX01 models: 60,000 make-and-break

cycles at full load. All other models: 30,000 cycles.

CONTACT RESISTANCE: Below 20 m Ω typ. initial @

2-4 V DC, 100 mA, for both silver and gold plated contacts.

INSULATION RESISTANCE: 109 Ω min.

DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.

OPERATING TEMPERATURE: –30ºC to 85ºC.

SOLDERABILITY: Per MIL-STD-202F method 208D, or

EIA RS-186E method 9 (1 hour steam aging).

NOTE: Any models supplied with P, R, Q, B or G contact material are RoHS compliant

and compatible.

NOTE: Specifications and materials listed above are for switches with standard options.

For information on specific and custom switches, consult Customer Service Center.

Models Available

Materials

CASE: Glass filled nylon 6/6, flame retardant, heat stabilized or

diallyl phthalate (DAP), (UL 94V-0) or glass filled nylon 4/6, flame

retardant, heat stabilized.

ACTUATOR: Brass, chrome plated.

BUSHING: Brass, nickel plated.

HOUSING: Stainless steel.

SWITCH SUPPORT: Brass, matte-tin plated.

END CONTACTS: B contact material: Copper alloy, with gold plate

over nickel plate. Q contact material: Coin silver, silver plated.

See above for additional contact materials.

CENTER CONTACTS & TERMINALS: B contact material: Copper alloy,

with gold plate over nickel plate. Q contact material: Copper alloy,

silver plated. See page F-42 for additional contact materials.

TERMINAL SEAL: Epoxy.

HARDWARE: Nut & Locking Ring: Brass, nickel plated.

Lockwasher: Steel, nickel plated. Additional hardware available

separately, see Section N.

Build-A-Switch

To order, simply select desired option from each category and place in the appropriate box. Available options are shown and

described on pages F-33 thru F-37. For additional options not shown in catalog, consult Customer Service Center. All models

have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.

Switch Function

T101 SPDT On-None-On

T102 SPDT Off-None-On

T103 SPDT On-Off-On

T105 SPDT Mom.-Off-Mom.

T107 SPDT On-Off-Mom.

T108 SPDT On-None-Mom.

T201 DPDT On-None-On

T203 DPDT On-Off-On

T205 DPDT Mom.-Off-Mom.

T207 DPDT On-Off-Mom.

T208 DPDT On-None-Mom.

T211 DPDT On-On-On.

F

Actuator

P3 Flatted,

anti-rotation,

.490" high

S .370" high

K Locking lever, round tip

L1 .640" high

M1 .220" high

S1 .410" high

M .210" high

L .290" high

Bushing

H .220" high, threaded, flat

Terminations

H9 .220" high, unthreaded, flat

A Right angle, PC thru-hole

CF Splashproof, .310" high, threaded, flat AV Vertical right angle,

D9 .260" high, unthreaded, keyway

PC thru-hole

T .310" high, threaded, flat

C PC Thru-hole

T9 .310" high, unthreaded, flat

V3 Vertical mount V-bracket

TD .260" high, threaded, keyway

Z Solder lug

TK .310" high, threaded, keyway

W Wire wrap

Y .220" high, threaded, keyway

Y9 .220" high, unthreaded, keyway

Contact Material

B Gold

P Gold, matte tin

Q Silver

G Gold over silver

R Gold over silver, matte-tin

Seal

E Epoxy

F–32

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ck-components.com

Share Link: