Integrated circuits, Transistor, Semiconductors Free Datasheet Search and Download Site


TSC5027 View Datasheet(PDF) - Traco Power

Part NameTSC5027 Traco
Traco Power Traco
DescriptionDC/DC Converter (50 – 2500 Watt)


TSC5027 Datasheet PDF : 13 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
DC/DC Converter
TSC Series 50 2500 Watt
General Specifications
Isolation resistance
Input/Output (500VDC)
Reliability (MIL-HDBK-217 E)
Safety standards
Electromagnetic compatibility (EMC), Emission
Conducted RI suppression on input
Electromagnetic compatibility (EMC), Immunity
Electrical fast transients / burst immunity
Surge immunity
Connection
> 10 M Ohm
> 100000 h @ 40°C
IEC/EN 60950
EN 55022, class A (class B on request)
IEC/EN 6100044, 2kV
IEC/EN 6100045, 2kV
H15 male connector (DIN 41612)
(screw terminal for output current >50A)
Alarm Options
Power fail
Option p
Signal if input voltage drops below the specified limit.
Signal output is NPN open collector, activated in ok-status
DC- ok
Option d
Signal if output voltage drops below the specified limit
Signal output is NPN open collector, activated in ok-status
Relay output
Control Options
Option r
Relay instead of logical output for alarm signals.
(in combination with option pand d)
External On/OFF
Option h
Connection to negative input line inactivates the unit
System reset
Option y
Reset input specified for VME systems
External programming
I/O Options
Option e
External programming of the output voltage by a potentiometer
or an external voltage of 0VDC to 10VDC. Details need to be
specified.
Current sharing
Option cs
Provides balanced load for units in parallel operation.
Controlled over interconnecting wire.
Decoupling diode
Option dd
For redundant operation. Internal fault of one unit does not affect
other units in a parallel circuit .
Inrush current limiting
Mechanical Options
Option i
A thermistor in series to the input lines reduces its resistance
when it gets warm.
Wall mounting
Option w
Module is screwed on a mounting plate for install in a cabinet
This option includes screw terminal block for connection
Mechanical strength
Option ms
Rugged construction for harsh environment.
Extended temperature range Option c
The unit is designed and tested for operation at an ambient
temperature range of 40...+75°C
Further options and combinations on request!
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
Page 8
Direct download click here
HOME 'TSC5027' Search

The TSC series is a range high quality DC/DC converters qualified for demanding applications in industrial automation and telecom systems. The modular design allows a very high flexibility of input/output configuration and application specific options at very reasonable cost even for low quantities. All models are constructed as rugged plug-in module for 19"-subrack (Euro cassette) with wall mounting as option.

Features
■ Plug-in Modules for 19"-Subracks (3U and 6U Height)
■ Available DC-Input Voltage Ranges 18-36,36-75,80-160 and 160-320VDC
■ Also Models with AC-Input (see page 6)
■ Standard Output Voltages: 5-250VDC, up to 200A
■ EMI Compliance with EN 55022 class A
■ Safety Compliance to IEC/EN 60950
■ Many Options available, i.e. Powerfail Signals, Ext. On/Off, redundant Operation, Wall Mounting
■ Customized Version available on request
■ 2 Years Product Warranty

 

Share Link : 

한국어     日本語     русский     简体中文     español
@ 2015 - 2018  [ Home  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]