Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

M4-32 View Datasheet(PDF) - Lattice Semiconductor

Part NameDescriptionManufacturer
M4-32 High-performance E2CMOS in-system programmable logic, 5-V VCC, 32 macrocells, 32 I/Os, 12ns Lattice
Lattice Semiconductor Lattice
M4-32 Datasheet PDF : 62 Pages
First Prev 31 32 33 34 35 36 37 38 39 40 Next Last
ABSOLUTE MAXIMUM RATINGS
M4 and M4A5
Storage Temperature . . . . . . . . . . . . . .-65°C to +150°C
Ambient Temperature
with Power Applied . . . . . . . . . . . . . . -55°C to +100°C
Device Junction Temperature . . . . . . . . . . . . . +130°C
Supply Voltage
with Respect to Ground . . . . . . . . . . . -0.5 V to +7.0 V
DC Input Voltage . . . . . . . . . . . . -0.5 V to VCC + 0.5 V
Static Discharge Voltage . . . . . . . . . . . . . . . . . 2000 V
Latchup Current (TA = -40°C to +85°C). . . . . . . 200 mA
Stresses above those listed under Absolute Maximum
Ratings may cause permanent device failure. Functionality at
or above these limits is not implied. Exposure to Absolute
Maximum Ratings for extended periods may affect device
reliability.
OPERATING RANGES
Commercial (C) Devices
Ambient Temperature (TA)
Operating in Free Air . . . . . . . . . . . . . . . 0°C to +70°C
Supply Voltage (VCC)
with Respect to Ground . . . . . . . . . +4.75 V to +5.25 V
Industrial (I) Devices
Ambient Temperature (TA)
Operating in Free Air . . . . . . . . . . . . . . -40°C to +85°C
Supply Voltage (VCC)
with Respect to Ground . . . . . . . . . . +4.50 V to +5.5 V
Operating ranges define those limits between which the func-
tionality of the device is guaranteed.
5-V DC CHARACTERISTICS OVER OPERATING RANGES
Parameter
Symbol
Parameter Description
Test Conditions
Min Typ Max Unit
VOH
Output HIGH Voltage
VOL
Output LOW Voltage
VIH
Input HIGH Voltage
IOH = –3.2 mA, VCC = Min, VIN = VIH or VIL
2.4
IOH = 0 mA, VCC = Max, VIN = VIH or VIL
IOL = 24 mA, VCC = Min, VIN = VIH or VIL (Note 1)
Guaranteed Input Logical HIGH Voltage for all Inputs
(Note 2)
2.0
V
3.3
V
0.5
V
V
VIL
Input LOW Voltage
Guaranteed Input Logical LOW Voltage for all Inputs
(Note 2)
0.8
V
IIH
Input HIGH Leakage Current
VIN = 5.25 V, VCC = Max (Note 3)
IIL
Input LOW Leakage Current
VIN = 0 V, VCC = Max (Note 3)
IOZH
Off-State Output Leakage Current HIGH VOUT = 5.25 V, VCC = Max, VIN = VIH or VIL (Note 3)
IOZL
Off-State Output Leakage Current LOW VOUT = 0 V, VCC = Max , VIN = VIH or VIL (Note 3)
ISC
Output Short-Circuit Current
VOUT = 0.5 V, VCC = Max (Note 4)
–30
10
µA
–10
µA
10
µA
–10
µA
–160 mA
Notes:
1. Total IOL for one PAL block should not exceed 64 mA.
2. These are absolute values with respect to device ground, and all overshoots due to system or tester noise are included.
3. I/O pin leakage is the worst case of IIL and IOZL (or IIH and IOZH).
4. Not more than one output should be shorted at a time and duration of the short-circuit should not exceed one second.
VOUT = 0.5 V has been chosen to avoid test problems caused by tester ground degradation.
MACH 4 Family
38
Direct download click here

 

Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2020  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]