Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

HE1AN-AC100V View Datasheet(PDF) - Panasonic Corporation

Part Name
Description
Manufacturer
HE1AN-AC100V Datasheet PDF : 7 Pages
1 2 3 4 5 6 7
HE
RATING
1. Coil data
1) AC coils
Nominal coil voltage
12V AC
24V AC
48V AC
100/120V AC
200/240V AC
Pick-up voltage
(at 20°C 68°F)
70%V or less of
nominal voltage
(Initial)
Drop-out voltage
(at 20°C 68°F)
15%V or more of
nominal voltage
(Initial)
Nominal operating current
[±10%] (at 20°C 68°F)
138mA
74mA
39mA
18.7 to 2.1mA
9.1 to 10.8mA
Nominal operating power
1.7VA
1.8VA
1.9VA
1.9 to 2.7VA
1.8 to 2.6VA
Max. applied voltage
(at 20°C 68°F)
110%V of
nominal voltage
2) DC coils
Nominal coil voltage
6V DC
12V DC
24V DC
48V DC
100V DC
110V DC
Pick-up voltage
(at 20°C 68°F)
70%V or less of
nominal voltage
(Initial)
Drop-out voltage
(at 20°C 68°F)
10%V or more of
nominal voltage
(Initial)
Nominal operating
current
[±10%] (at 20°C 68°F)
320mA
160mA
80mA
40mA
19mA
18mA
Coil resistance
[±10%] (at 20°C 68°F)
18.8
75
300
1,200
5,200
6,300
Nominal operating
power
1.92W
1.92W
1.92W
1.92W
1.92W
1.92W
Max. applied voltage
(at 55°C 131°F)
110%V of
nominal voltage
2. Specifications
Characteristics
Contact
Rating
Electrical
characteristics
Item
Contact material
Arrangement
Contact resistance (Initial)
Nominal switching capacity (resistive load)
Max. switching power
Max. switching voltage
Max. switching current
Nominal operating power
Min. switching capacity (Reference value)*1
Insulation resistance (Initial)
Breakdown voltage
(Initial)
Between open contacts
Between contact sets
Between contact and coil
Temperature rise (coil)
Surge breakdown voltage*2
(between contact and coil) (Initial)
Operate time (at nominal voltage)
Release time (at nominal voltage)
Mechanical
characteristics
Expected life
Shock resistance
Vibration resistance
Mechanical
Functional
Destructive
Functional
Destructive
Electrical (resistive load) (at 20 times/min.)
Conditions
Unit weight
Conditions for operation, transport and storage*3
Max. operating speed
Specifications
AgSnO2 type
1 Form A
2 Form A
Max. 100 m(By voltage drop 6 V DC 1A)
30A 277V AC
25A 277V AC
8,310VA
6,925VA
277V AC, 30V DC
30A
25A
DC: 1.92W, AC: 1.7 to 2.7VA
100mA 5V DC
Min. 1,000M(at 500V DC) Measurement at same location as “Breakdown voltage” section.
2,000 Vrms for 1min (Detection current: 10mA.)
4,000 Vrms for 1min (Detection current: 10mA.)
5,000 Vrms for 1min (Detection current: 10mA.)
DC: Max. 60°C (at 55°C) (By resistive method), AC: Max. 65°C (at 55°C) (By resistive method)
Min. 10,000V
Max. 30ms (excluding contact bounce time)
DC: Max.10ms (excluding contact bounce time, without diode),
AC: Max. 30ms (excluding contact bounce time)
Min. 98 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10µs.)
Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 1 mm (Detection time: 10µs.)
10 to 55 Hz at double amplitude of 1.5 mm
DC: Min. 107 (at 180 times/min.), AC: Min. 5×106 (at 180 times/min.)
Min. 105 (30A 277V AC)
Min. 2×105 (30A 250V AC)
Min. 105 (25A 277V AC)
Min. 2×105 (20A 250V AC)
Ambient temperature: –50°C to +55°C –58°F to +131°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature),
Air pressure: 86 to 106kPa
20 times/min. (at max. rating)
PC board type: approx. 80g 2.82oz, Plug-in type/TM type: approx. 90g 3.17oz,
Screw terminal type: approx. 120g 4.23oz
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. Wave is standard shock voltage of ±1.2×50µs according to JEC-212-1981
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
ASCTB183E 201202-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
Direct download click here

 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]