No. RECALL Cycle G-controlled
46 RECALL Cycle Time
47 RECALL Initiation Cycle Time
48 NE Setup
49 Write Enable Setup
50 Chip Enable Setup
RECALL Cycle: G-controlledo, r
m: Measured with W and NE both returned HIGH, and G returned LOW. Note that STORE cycles are
inhibited/aborted by VCC < VSWITCH (STORE inhibit).
n: Once tw(W)S has been satisfied by NE, G, W and E, the STORE cycle is completed automatically. Any of NE, G, W and E may be used to
terminate the STORE initiation cycle.
o: If E is LOW for any period of time in which W is HIGH while G and NE are LOW, than a RECALL cycle may be initiated.
For E-controlled STORE during tw(E)S W, G, NE have to be static.
p: Measured with W and NE both HIGH, and G and E LOW.
q: Once tw(N)R has been satisfied by NE, G, W and E, the RECALL cycle is completed automatically. Any of NE, G or E may be used to
terminate the RECALL initiation cycle.
r: If W is LOW at any point in which both E and NE are LOW and G is HIGH, than a STORE cycle will be initiated instead of a RECALL.
April 7, 2005