Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

SLX24C08/16 View Datasheet(PDF) - Siemens AG

Part NameDescriptionManufacturer
SLX24C08/16 8/16 Kbit (1024/2048 × 8 bit) Serial CMOS-EEPROM with I2C Synchronous 2-Wire Bus Siemens
Siemens AG Siemens
SLX24C08/16 Datasheet PDF : 22 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
SLx 24C08/16
Revision History:
Previous Version:
(in previous (in current
Version) Version)
4, 5
4, 5
11, 12
11, 12
Current Version: 1998-07-27
Subjects (major changes since last revision)
Text was changed to “Typical programming time 5 ms for up to
16 bytes”.
WP = VCC protects upper half entire memory.
CS0, CS1 and CS2 were replaced by n.c.
The paragraph “Chip Select (CS0, CS1, CS2)” was removed
The erase/write cycle is finished latest after 10 8 ms.
Figure 11: second command byte is a CSR and not CSW.
“Capacitive load …” were added.
Some timings were changed.
The line “erase/write cycle” was removed.
Chapter 7.4 “Erase and Write Characteristics” has been added.
I2C Bus
Purchase of Siemens I2C components conveys the license under the Philips I2C patent to use the components in
the I2C system provided the system conforms to the I2C specifications defined by Philips.
Edition 1998-07-27
Published by Siemens AG,
Bereich Halbleiter, Marketing-
Kommunikation, Balanstraße 73,
81541 München
© Siemens AG 1998.
All Rights Reserved.
Attention please!
As far as patents or other rights of third parties are concerned, liability is only assumed for components, not for applications, processes
and circuits implemented within components or assemblies.
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved.
For questions on technology, delivery and prices please contact the Semiconductor Group Offices in Germany or the Siemens Companies
and Representatives worldwide (see address list).
Due to technical requirements components may contain dangerous substances. For information on the types in question please contact
your nearest Siemens Office, Semiconductor Group.
Siemens AG is an approved CECC manufacturer.
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we
will take packing material back, if it is sorted. You must bear the costs of transport.
For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs in-
Components used in life-support devices or systems must be expressly authorized for such purpose!
Critical components1 of the Semiconductor Group of Siemens AG, may only be used in life-support devices or systems2 with the express
written approval of the Semiconductor Group of Siemens AG.
1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the
failure of that life-support device or system, or to affect its safety or effectiveness of that device or system.
2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain hu-
man life. If they fail, it is reasonable to assume that the health of the user may be endangered.
Direct download click here


Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2019  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]