SA13CA View Datasheet(PDF) - SynSemi, Inc.

Part Name

Description

Manufacturer

SA13CA

TRANSIENT VOLTAGE SUPPRESSOR

SynSemi, Inc. 

SA5.0 - SA170A

Stand-off Zener Voltage Range 5.0 - 170 Volts

PPK : 500 Watts

TRANSIENT VOLTAGE

SUPPRESSOR

DO - 41

FEATURES :

* 500W surge capability at 1ms

* Excellent clamping capability

* Low zener impedance

* Fast response time : typically less

then 1.0 ps from 0 volt to VBR(min.)

* Typical IR less then 1µA above 10V

* Pb / RoHS Free

MECHANICAL DATA

* Case : DO-41 Molded plastic

* Epoxy : UL94V-O rate flame retardant

* Lead : Axial lead solderable per MIL-STD-202,

method 208 guaranteed

* Polarity : Color band denotes cathode end except Bipolar.

* Mounting position : Any

* Weight : 0.339 gram

0.107 (2.74)

0.080 (2.03)

0.034 (0.86)

0.028 (0.71)

1.00 (25.4)

MIN.

0.205 (5.20)

0.160 (4.10)

1.00 (25.4)

MIN.

Dimensions in inches and (millimeters)

DEVICES FOR BIPOLAR APPLICATIONS

For bi-directional use C or CA Suffix

Electrical characteristics apply in both directions

MAXIMUM RATINGS

Rating at 25 °C ambient temperature unless otherwise specified.

Rating

Peak Power Dissipation at Ta = 25 °C, Tp=1ms (Note1)

Steady State Power Dissipation at TL = 75 °C

Lead Lengths 0.375", (9.5mm) (Note 2)

Peak Forward Surge Current, 8.3ms Single Half

Sine-Wave Superimposed on Rated Load

(JEDEC Method) (Note 3)

Operating and Storage Temperature Range

Symbol

PPK

PD

IFSM

TJ, TSTG

Value

Minimum 500

3.0

70

- 65 to + 175

Unit

W

W

A

°C

Notes :

(1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 °C per Fig. 1

(2) Mounted on Copper Leaf area of 1.57 in2 (40mm2).

(3) 8.3 ms single half sine-wave, duty cycle = 4 pulses per minutes maximum.

Page 1 of 4

Rev. 03 : March 25, 2005

Share Link: