SA130 View Datasheet(PDF) - General Semiconductor
Part Name
Description
Manufacturer
SA130 Datasheet PDF : 6 Pages
| |||
SA5.0 THRU SA170CA
TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR
Stand-off Voltage - 5.0 to 170 Volts Peak Pulse Power - 500 Watts
DO-204AC
1.0
(25.4)
MIN.
0.034 (0.86)
0.028 (0.71)
DIA.
0.300 (7.6)
0.230 (5.8)
1.0
(25.4)
MIN.
0.140 (3.6)
0.104 (2.6)
DIA.
Dimensions in inches and (millimeters)
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ Glass passivated junction
♦ 500W peak pulse power surge capability with a
10/1000µs waveform, repetition rate (duty cycle): 0.01%
♦ Excellent clamping capability
♦ Low incremental surge resistance
♦ Fast response time: typically less
than 1.0ps from 0 Volts to V(BR) for uni-directional and
5.0ns for bi-directional types
♦ For devices with V(BR)≥10V, ID are typically less than
1.0µA
♦ High temperature soldering guaranteed:
265°C/10 seconds 0.375” (9.5mm) lead length,
5lbs (2.3 kg) tension
MECHANICAL DATA
Case: JEDEC DO-204AC molded plastic body over
passivated junction
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: For uni-directional types the color band denotes
the cathode, which is positive with respect to the anode
under normal TVS operation
Mounting Position: Any
Weight: 0.015 ounce, 0.4 gram
DEVICES FOR BIDIRECTIONAL APPLICATIONS
For bi-directional use C or CA Suffix. (e.g. SA5.0C, SA170CA).
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified
Peak pulse power dissipation with a 10/1000µs waveform
(NOTE 1, FIG. 1)
Peak pulse current with a 10/1000µs waveform
(NOTE 1)
Steady state power dissipation at TL=75°C
lead lengths 0.375" (9.5mm) (NOTE 2)
Peak forward surge current, 8.3ms single half
sine-wave superimposed on rated load, unidirectional only
(JEDEC Method) (NOTE 3)
Maximum instantaneous forward voltage at 35A for
unidirectional only
Operating junction and storage temperature range
NOTES
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2
(2) Mounted on copper pad area of 1.6 x 1.6” (40 x 40mm) per Fig. 5
(3) 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum
SYMBOL
PPPM
IPPM
PM(AV)
IFSM
VF
TJ, TSTG
VALUE
Minimum 500
SEE TABLE 1
3.0
70
3.5
-55 to +175
UNITS
Watts
Amps
Watts
Amps
Volts
°C
1/25/99
|
|
Share Link: 