Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

MBR10100CT View Datasheet(PDF) - GOOD-ARK

Part NameDescriptionManufacturer
MBR10100CT Dual High-Voltage Schottky Barrier Rectifiers GOOD-ARK
GOOD-ARK GOOD-ARK
MBR10100CT Datasheet PDF : 2 Pages
1 2
MBR1090CT thru MBR10100CT
Dual High-Voltage Schottky Barrier Rectifiers
Reverse Voltage 90 to 100 Volts Forward Current 10.0 Amperes
Features
‹ Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
‹ Dual rectifier construction, positive center tap
‹ Metal silicon junction, majority carrier conduction
‹ Low power loss, high efficiency
‹ Guardring for overvoltage protection
‹ For use in low voltage, high frequency inverters, free wheeling,
and polarity protection applications
TO-220AB
Mechanical Data
‹ Case: JEDEC TO-220AB molded plastic body over passivated
chips
‹ Terminals: Plated leads, solderable per MIL-STD-750,
Method 2026
‹ High temperature soldering guaranteed:
250oC/10 seconds, 0.25" (6.35mm) from case
‹ Polarity: As marked
‹ Mounting Position: Any
‹ Mounting Torque: 10 in-lbs maximum
‹ Weight: 0.08 ounce, 2.24 grams
Maximum Ratings and Electrical Characteristics
( TC = 25oC unless otherwise noted )
Parameter
Symbol
MBR1090CT
Dimensions in inches and (millimeters)
MBR10100CT
Unit
Maximum repetitive peak reverse voltage
VRRM
90
100
Working peak reverse voltage
VRWM
90
100
Maximum DC blocking voltage
VDC
Maximum average forward
rectified current (See Fig. 1)
Total device
Per leg
IF(AV)
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method) per leg
IFSM
90
100
10
5.0
120
Peak repetitive reverse current per leg at tp = 2.0us, 1KHz
IRRM
0.5
Voltage rate of change (rated VR)
Maximum instantaneous forward voltage per leg (Note 4)
dv/dt
10,000
at IF=5.0A, TC=25oC
VF
at IF=5.0A, TC=125oC
Maximum reverse current per TJ=25oC
leg at working peak reverse
IR
voltage (Note 4)
TJ=100oC
0.85
0.75
100
6.0
Typical thermal resistance per leg
RθJC
4.4
Operating junction temperature range
TJ
-55 to +150
Storage temperature range
TSTG
-55 to +150
Notes:
1. Clip mounting (on case), where lead does not overlap heatsink with 0.110" offset
2. Clip mounting (on case), where leads do overlap heatsink
3. Screw mounting with 4-40 screw, where washer diameter is < 4.9 mm (0.19")
4. Pulse test: 300us pulse width, 1% duty cycle
356
Volts
Volts
Volts
Amps
Amps
Amps
V/us
Volts
uA
mA
oC/W
oC
oC
Direct download click here

 

Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2019  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]