LT1004IZ-1.2 View Datasheet(PDF) - Linear Technology
Part Name
Description
Manufacturer
LT1004IZ-1.2 Datasheet PDF : 8 Pages
| |||
LT1004
PACKAGE DESCRIPTIO
H Package
2-Lead and 3-Lead TO-46 Metal Can
(Reference LTC DWG # 05-08-1340)
REFERENCE
PLANE
0.209 – 0.219
(5.309 – 5.537)
0.178 – 0.195
(4.521 – 4.953)
0.500
(12.700)
MIN
0.085 – 0.105
(2.159 – 2.667)
0.050
(1.270)
TYP
0.100
(2.540)
TYP
PIN 1
*
0.025
(0.635)
MAX
45°
0.036 – 0.046
(0.914 – 1.168)
0.016 – 0.021**
(0.406 – 0.533)
DIA
*LEAD DIAMETER IS UNCONTROLLED BETWEEN THE REFERENCE PLANE
AND 0.045" BELOW THE REFERENCE PLANE
**FOR
SOLDER
DIP
LEAD
FINISH,
LEAD
DIAMETER
IS
0.016
(0.406
–
–
0.024
0.610)
0.050
(1.270)
TYP
FOR 3-LEAD PACKAGE ONLY
0.028 – 0.048
(0.711 – 1.219)
H02/03(TO-46) 1098
OBSOLETE PACKAGE
S8 Package
8-Lead Plastic Small Outline (Narrow .150 Inch)
(Reference LTC DWG # 05-08-1610)
0.010
(0.254
–
–
0.020
0.508)
×
45°
0.008 – 0.010
(0.203 – 0.254)
0.053 – 0.069
(1.346 – 1.752)
0°– 8° TYP
0.016 – 0.050
(0.406 – 1.270)
0.014 – 0.019
(0.355 – 0.483)
TYP
*DIMENSION DOES NOT INCLUDE MOLD FLASH. MOLD FLASH
SHALL NOT EXCEED 0.006" (0.152mm) PER SIDE
**DIMENSION DOES NOT INCLUDE INTERLEAD FLASH. INTERLEAD
FLASH SHALL NOT EXCEED 0.010" (0.254mm) PER SIDE
0.004 – 0.010
(0.101 – 0.254)
0.050
(1.270)
BSC
0.228 – 0.244
(5.791 – 6.197)
0.189 – 0.197*
(4.801 – 5.004)
8
7
6
5
1
2
34
0.150 – 0.157**
(3.810 – 3.988)
SO8 1298
Z Package
3-Lead Plastic TO-92 (Similar to TO-226)
(Reference LTC DWG # 05-08-1410)
0.060 ± 0.005
(1.524± 0.127)
DIA
0.180 ± 0.005
(4.572 ± 0.127)
0.180 ± 0.005
(4.572 ± 0.127)
0.90
(2.286)
NOM
0.500
(12.70)
MIN
0.050 UNCONTROLLED
(1.270) LEAD DIMENSION
MAX
5°
NOM
0.050
(1.27)
BSC
0.016 ± 0.003
(0.406 ± 0.076)
0.060 ± 0.010
(1.524 ± 0.254)
0.140 ± 0.010
(3.556 ± 0.127)
10° NOM
0.015 ± 0.002
(0.381 ± 0.051)
Z3 (TO-92) 0401
0.098 +016/–0.04
(2.5 +0.4/–0.1)
2 PLCS
TO-92 TAPE AND REEL
REFER TO TAPE AND REEL SECTION OF
LTC DATA BOOK FOR ADDITIONAL INFORMATION
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Linear Technology Corporation makes no represen-
tation that the interconnection of its circuits as described herein will not infringe on existing patent rights.
7
|
|
Share Link: 