Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

E-102 데이터 시트보기 (PDF) - SEMITEC Corporation

부품명상세내역제조사
E-102 SURGE ABSORBERS , SENSORS AND MODULES , THERMISTORS Semitec
SEMITEC Corporation Semitec
E-102 Datasheet PDF : 44 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
THERMISTOR
"Thermistor" is the generic name given to
thermally sensitive resistors.
Negative temperature coefficient thermistor
is generally called as thermistor. Thermistor
is a semiconducting ceramic resistor
produced by sintering the materials at high
temperature and made mainly from metal
oxide.
Depending on the manufacturing method
and the structure, there are many shapes
and characteristics for various purposes
such as temperature measurement,
temperature compensation and etc.
The thermistor resistance values, unless
otherwise specified, are classified at a
standard temperature of 25ЊC.
B constant is calculated from the resistance
values at 25ЊC and 85ЊC.
Resistance -Temperature Characteristics
The resistance of a temperature is solely a function
of its absolute temperature. Since electrical power
being dissipated within a temperature might heat
above its ambient temperature and thereby reduce
its resistance, it is necessary to test for resistance
with temperature. The resistance so measured is
called RT, which means the resistance at essentially
zero-power.
The mathematical expression which relates the
resistance and the absolute temperature of
a thermistor is as follows:
RaϭRb exp B
1
T1
Ϫ
1
T2
100k
Where: Ra is the resistance at absolute temperature T1
Rb is the resistance at absolute temperature T2
B is a constant which depends on the
material of the thermistor
Unless otherwise specified,all values of B are
determined from measurements made at 25ЊC and
85ЊC.
The temperature coefficient of resistance
is expressed in the following equation:
␣ϭϪ
B
T2
ϫ100 (%/
ЊC)
10k
B:3350
1k
B:3400
2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9
Temperature(1/ Tx103)
Dissipation factor
Dissipation factor () is power in milliwatts
required to raise thermistor temperature 1ЊC.
Measured with thermistor suspended by its leads in
a specified environment.
␦ ϭ⌬Pt (mW/ ЊC)
P :Power(mW)
t:Raise temperature(ЊC)
Thermal time constant
Thermal time constant (a) is the time required by a
thermistor to change 63% of the difference between
its initial and final temperature. Measured with
thermistor suspended by its leads in specified
environment.
95
87
63
a
2a
3a
5a
Time (s)
6
Direct download click here

 

Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2019  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]