Y1112 View Datasheet(PDF) - Power Innovations
Part Name
Description
Manufacturer
Y1112 Datasheet PDF : 4 Pages
| |||
THE FLUORACTOR® Y1112L
FLUORESCENT LAMP STARTER SWITCH
MARCH 1998 - REVISED MAY 1998
applications data
The conventional method of starting fluorescent tubes employs the use of an electromechanical canister. This
consists of a bimetallic strip which opens as it cools and in conjunction with the ballast inductor, provides the
tube striking voltage. However, the random nature of the pulsing results in repeated striking attempts and
degradation of both the tube and starter. The tube degradation is illustrated by its progressively blackening
ends and ultimately required tube replacement.
The Y1112L, “Fluoractor®â€, has been specifically introduced for use in electronic starters. This unique device
offers the lighting industry an opportunity to develop electronic starters small enough to be retrofit
replacements for the established electromechanical canisters. Its double thyristor structure with integrated
zener clamp diode and current mirror provides the technology for a starter with enhanced features such as
controlled flicker free start up, automatic tube shutdown at end of tube life and reduced degradation of tube
ends leading to extended life. The increased functionality, lifetime and reliability of these starters has led in
some cases to them being embodied in the ballast itself, a development not feasible with the old
electromechanical canisters.
D1 to 4
(see Note 1)
R1
150 kΩ
R6
330 kΩ
A
G
Y1112L
ΤΗ2
R2
K
68 kΩ
D5
R3
D8
6.8 kΩ
D6
R5
4.7 kΩ
R4
D7
270 kΩ
C1
100 µF
Figure 1. Two terminal starter circuit
NOTE 1: These rectifiers need to be voltage selected for VR ≥ V(BR)max + 150 V
PRODUCT INFORMATION
2
|
|
Share Link: 