AD100-8-S1 View Datasheet(PDF) - Unspecified
Part Name
Description
Manufacturer
AD100-8-S1 Datasheet PDF : 2 Pages
| |||
Disclaimer: Due to our policy of continued development, specifications are subject to change without notice.
TYPICAL GAIN vs BIAS VOLTAGE
QUANTUM EFFICIENCY for M = 1
10000
1000
100
10
1
1 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
BIAS VOLTAGE (V)
1.00
0.90
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00
400 480 560 640 720 800 880 960 1040
WAVELENGTH (nm)
DEVICE SCHEMATIC
PIN 1
PIN 4
PIN 3
SUGGESTED CIRCUIT SCHEMATIC
BIAS SUPPLY VOLTAGE
CURRENT LIMITING RESISTOR
MIN. 0.1 µF CAPACITOR
CLOSEST TO APD
APD
DIODE, PROTECTIVE CIRCUIT
READ-OUT CIRCUIT OR
50 Ohm LOAD RESISTANCE
APPLICATION NOTES
• Current should be limited by a protecting resistor or current limiting IC inside the power supply.
• Use of low noise read-out IC.
• For high gain applications (M>50) bias voltage should be temperature compensated.
• For low light level applications, blocking of ambient light should be used.
HANDLING PRECAUTIONS:
• Soldering temperature - 260°C for 10 seconds max. The device must be protected against solder flux vapor.
• Minimum pin length - 2 mm
• ESD protection - Standard precautionary measures are sufficient.
• Storage - Store devices in conductive foam.
• Avoid skin contact with window.
• Clean window with Ethyl alcohol if necessary.
• Do not scratch or abrade window.
USA:
Pacific Silicon Sensor, Inc.
5700 Corsa Avenue, #105
Westlake Village, CA 91362 USA
Phone (818) 706-3400
Fax (818) 889-7053
Email: sales@pacific-sensor.com
www.pacific-sensor.com
Proud Members of the Silicon Sensor International AG Group of companies
8/23/2010
International sales:
Silicon Sensor International AG
Peter-Behrens-Str. 15
D-12459 Berlin, Germany
Phone +49 (0)30-63 99 23 10
Fax +49 (0)30-63 99 23 33
Email: sales@silicon-sensor.de
www.silicon-sensor.de
Page 2 of 2
|
|
Share Link: 