Excellent video specifications (RL = 150 Ω, G = +2)
Gain flatness: 0.1 dB to 60 MHz
Differential gain error: 0.01%
Differential phase error: 0.02°
Maximum power supply current (50 mW): 5.0 mA/amp
High speed and fast settling
−3 dB bandwidth (G = +1): 600 MHz
−3 dB bandwidth (G = +2): 500 MHz
Slew rate: 1200 V/µs
Settling time to 0.1%: 16 ns
THD at fC = 5 MHz: −65 dBc
Third-order intercept at f1 = 10 MHz: 33 dBm
SFDR at f = 5 MHz: −66 dB
Crosstalk at f = 5 MHz: −60 dB
High output drive
Over 70 mA output current
Drives up to eight back terminated 75 Ω loads (four
loads/side) while maintaining good differential
gain/phase performance (0.01%/0.17°)
Available in 8-lead SOIC and MSOP packages
Video line drivers
Differential line drivers
The AD8002 is a dual, low power, high speed amplifier
designed to operate on ±5 V supplies. The AD8002 features
unique transimpedance linearization circuitry, which allows the
AD8002 to drive video loads with excellent differential gain
and phase performance on only 50 mW of power per amplifier.
The AD8002 is a current feedback amplifier and features gain
flatness of 0.1 dB to 60 MHz while offering differential gain and
phase error of 0.01% and 0.02°, which makes the AD8002 ideal
for professional video electronics such as cameras and video
switchers. Additionally, the low distortion and fast settling of
the AD8002 make it ideal for buffer high speed analog-to-
digital converters (ADCs).
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
Dual 600 MHz, 50 mW
Current Feedback Amplifier
PIN CONNECTION BLOCK DIAGRAM
The AD8002 offers a low power of 5.0 mA/amp maximum
(VS = ±5 V) and can run on a single 12 V power supply, yet is
capable of delivering over 70 mA of load current. It is offered
in 8-lead SOIC and MSOP packages. These features make this
amplifier ideal for portable and battery-powered applications
where size and power are critical.
The bandwidth of 600 MHz along with 1200 V/µs of slew rate
make the AD8002 useful in many general-purpose high speed
applications where dual power supplies of up to ±6 V and single
supplies from 6 V to 12 V are needed. The AD8002 is available
in the industrial temperature range of −40°C to +85°C.
G = +2
Figure 2. 1 V Step Response, G = +1
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
©2015 Analog Devices, Inc. All rights reserved.