Dual 4-channel analog multiplexer/demultiplexer
ABSOLUTE MAXIMUM RATINGS1, 2
In accordance with the Absolute Maximum Rating System (IEC 134).
Voltages are referenced to GND (ground = 0 V).
DC supply voltage
–0.5 to +7.0
DC input diode current
VI < –0.5 or VI > VCC + 0.5 V
"ISK DC switch diode current
VS < –0.5 or VS > VCC + 0.5 V
DC switch current
–0.5 V < VS < VCC + 0.5 V
Storage temperature range
–65 to +150
Power dissipation per package
for temperature range: –40 to +125°C
– plastic DIL
– plastic mini-pack (SO)
above +70°C derate linearly with 12 mW/K
above +70°C derate linearly with 8 mW/K
– plastic shrink mini-pack (SSOP and TSSOP) above +60°C derate linearly with 5.5 mW/K
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
RECOMMENDED OPERATING CONDITIONS
VCC DC supply voltage
See Note 1 and Figure 5
Tamb Operating ambient temperature range in free air
See DC and AC
Input rise and fall times
VCC = 1.0 V to 2.0 V
VCC = 2.0 V to 2.7 V
VCC = 2.7 V to 6.0 V
1. The LV is guaranteed to function down to VCC = 1.0V (input levels GND or VCC); DC characteristics are guaranteed from VCC = 1.2V to VCC = 6.0V.
1998 Jun 23