Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

CD4052BCCW 查看數據表(PDF) - Fairchild Semiconductor

零件编号产品描述 (功能)生产厂家
CD4052BCCW Single 8-Channel Analog Multiplexer/Demultiplexer • Dual 4-Channel Analog Multiplexer/Demultiplexer • Triple 2-Channel Analog Multiplexer/Demultiplexer Fairchild
Fairchild Semiconductor Fairchild
CD4052BCCW Datasheet PDF : 13 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
November 1983
Revised August 2000
CD4051BC • CD4052BC • CD4053BC
Single 8-Channel Analog Multiplexer/Demultiplexer •
Dual 4-Channel Analog Multiplexer/Demultiplexer •
Triple 2-Channel Analog Multiplexer/Demultiplexer
General Description
The CD4051BC, CD4052BC, and CD4053BC analog mul-
tiplexers/demultiplexers are digitally controlled analog
switches having low “ON” impedance and very low “OFF”
leakage currents. Control of analog signals up to 15Vp-p
can be achieved by digital signal amplitudes of 315V. For
example, if VDD = 5V, VSS = 0V and VEE = −5V, analog sig-
nals from 5V to +5V can be controlled by digital inputs of
05V. The multiplexer circuits dissipate extremely low qui-
escent power over the full VDDVSS and VDDVEE supply
voltage ranges, independent of the logic state of the control
signals. When a logical “1” is present at the inhibit input ter-
minal all channels are “OFF”.
CD4051BC is a single 8-channel multiplexer having three
binary control inputs. A, B, and C, and an inhibit input. The
three binary signals select 1 of 8 channels to be turned
“ON” and connect the input to the output.
CD4052BC is a differential 4-channel multiplexer having
two binary control inputs, A and B, and an inhibit input. The
two binary input signals select 1 or 4 pairs of channels to
be turned on and connect the differential analog inputs to
the differential outputs.
CD4053BC is a triple 2-channel multiplexer having three
separate digital control inputs, A, B, and C, and an inhibit
input. Each control input selects one of a pair of channels
which are connected in a single-pole double-throw configu-
ration.
Features
s Wide range of digital and analog signal levels:
digital 3 – 15V, analog to 15Vp-p
s Low “ON” resistance: 80(typ.) over entire 15Vp-p
signal-input range for VDD VEE = 15V
s High “OFF” resistance:
channel leakage of ±10 pA (typ.) at VDD VEE = 10V
s Logic level conversion for digital addressing signals of
3 – 15V (VDD VSS = 3 – 15V) to switch analog signals
to 15 Vp-p (VDD VEE = 15V)
s Matched switch characteristics:
RON = 5(typ.) for VDD VEE = 15V
s Very low quiescent power dissipation under all
digital-control input and supply conditions:
1 µ W (typ.) at VDD VSS = VDD VEE = 10V
s Binary address decoding on chip
Ordering Code:
Order Number Package Number
Package Description
CD4051BCM
M16A
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow
CD4051BCSJ
M16D
16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
CD4051BCMTC
MTC16
16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
CD4051BCN
N16E
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
CD4052BCM
M16A
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow
CD4052BCSJ
M16D
16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
CD4052BCN
N16E
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
CD4053BCM
M16A
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow
CD4053BCSJ
M16D
16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
CD4053BCN
N16E
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
© 2000 Fairchild Semiconductor Corporation DS005662
www.fairchildsemi.com
Direct download click here

 

Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2019  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]