DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

TS941BIDT View Datasheet(PDF) - STMicroelectronics

Part Name
Description
Manufacturer
TS941BIDT Datasheet PDF : 19 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Absolute maximum ratings and operating conditions
TS941 TS942 TS944
1
Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings (AMR)
Symbol
Parameter
Value
Unit
VCC
Vid
Vin
Tstg
Tj
Rthja
Rthjc
ESD
Supply voltage (1)
Differential input voltage (2)
Input voltage range (3)
Storage temperature range
Maximum junction temperature
Thermal resistance junction to ambient (4)
SOT23-5
DIP8
DIP14
SO-8
SO-14
TSSOP8
TSSOP14
Thermal resistance junction to case (4)
SOT23-5
DIP8
DIP14
SO-8
SO-14
TSSOP8
TSSOP14
HBM: human body model (5)
MM: machine model (6) (TS941, TS942)
CDM: charged device model (7)
TS941 - TS944IDT
TS942 - TS944IPT
12
V
±12
V
VDD-0.3 to VCC+0.3
V
-65 to +150
°C
150
°C
250
85
66
°C/W
125
103
120
100
81
41
33
°C/W
40
31
37
32
2
kV
200
V
1.5
kV
1
Latch-up immunity
200
mA
Lead temperature (soldering, 10sec)
250
°C
1. All voltage values, except differential voltage are with respect to network terminal.
2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.
3. The magnitude of input and output voltages must never exceed VCC +0.3V.
4. Short-circuits can cause excessive heating and destructive dissipation. Rth are typical values.
5. Human body model: A 100 pF capacitor is charged to the specified voltage, then discharged through a
1.5 kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations
while the other pins are floating.
6. Machine model: A 200 pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of
connected pin combinations while the other pins are floating.
7. Charged device model: all pins and the package are charged together to the specified voltage and then
discharged directly to the ground through only one pin. This is done for all pins.
2/19
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]