DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

TS68040VFD/T25A View Datasheet(PDF) - Atmel Corporation

Part Name
Description
Manufacturer
TS68040VFD/T25A
Atmel
Atmel Corporation Atmel
TS68040VFD/T25A Datasheet PDF : 49 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
TS68040
The precise case outlines are described at the end of the specification (See “Package
Mechanical Data” on page 43.) and into MIL-STD-1835.
Electrical Characteristics
Absolute Maximum Ratings
Stresses above the absolute maximum rating may cause permanent damage to the
device. Extended operation at the maximum levels may degrade performance and affect
reliability.
Table 4. Absolute Maximum Ratings
Symbol
Parameter
Condition
Min
Max
Unit
VCC
Supply Voltage Range
VI
Input Voltage Range
PD
Power Dissipation
-0.3
7.0
V
-0.3
7.0
V
Large buffers enabled
7.7
W
Small buffers enabled
6.3
W
Note:
TC
Operating Temperature
-55
TJ
°C
Tstg
Storage Temperature Range
TJ
Junction Temperature(1)
-65
+150
°C
+125
°C
Tlead
Lead Temperature
Max.10 sec soldering
+300
°C
1. This device is not tested at TC = +125°C. Testing is performed by setting the junction temperature Tj = +125°C and allowing
the case and ambient temperatures to rise and fall as necessary so as not to exceed the maximum junction temperature.
Table 5. Recommended Conditions of Use
Unless otherwise stated, all voltages are referenced to the reference terminal
Symbol
Parameter
Min
Typ
Max
Unit
VCC
Supply Voltage Range
VIL
Logic Low Level Input Voltage Range
+4.75
GND
- 0.3
+5.25
V
0.8
V
Note:
VIH
Logic High Level Input Voltage Range
+2.0
VCC + 0.3
V
VOH
High Level Output Voltage
2.4
V
VOL
Low Level Output Voltage
0.5
V
Clock Frequency
-25 MHz Version
25
fc
-33 MHz Version
33
MHz
MHz
TC
Case Operating Temperature Range(1)
-55
TJmax
°C
TJ
Maximum Operating Junction Temperature
+125
°C
1. This device is not tested at TC = +125°C. Testing is performed by setting the junction temperature TJ = +125°C and allowing
the case and ambient temperatures to rise and fall as necessary so as not to exceed the maximum junction temperature.
9
2116A–HIREL–09/02
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]