TSC80C31-40AAR View Datasheet(PDF) - Temic Semiconductors
Part Name
Description
Manufacturer
TSC80C31-40AAR Datasheet PDF : 19 Pages
| |||
TSC80C31/80C51
Electrical Characteristics
Absolute Maximum Ratings*
Ambiant Temperature Under Bias :
C = commercial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
I = industrial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to 85°C
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . –65°C to + 150°C
Voltage on VCC to VSS . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to + 7 V
Voltage on Any Pin to VSS . . . . . . . . . . . . . . . . . . . –0.5 V to VCC + 0.5 V
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 W**
** This value is based on the maximum allowable die temperature and
the thermal resistance of the package
* Notice
Stresses at or above those listed under “ Absolute Maximum Ratings”
may cause permanent damage to the device. This is a stress rating only
and functional operation of the device at these or any other conditions
above those indicated in the operational sections of this specification is
not implied. Exposure to absolute maximum rating conditions may affect
device reliability.
DC Parameters
TA = 0°C to 70°C ; VSS = 0 V ; VCC = 5 V ± 10 % ; F = 0 to 44 MHz
TA = –40°C + 85°C ; VSS = 0 V ; VCC = 5 V ± 10 % ; F = 0 to 44 MHz
Symbol
Parameter
VIL Input Low Voltage
VIH
VIH1
VOL
Input High Voltage (Except XTAL and RST)
Input High Voltage (for XTAL and RST)
Output Low Voltage (Port 1, 2 and 3) (4)
VOL1 Output Low Voltage (Port 0, ALE, PSEN) (4)
VOH Output High Voltage Port 1, 2, 3
VOH1 Output High Voltage (Port 0, ALE, PSEN)
IIL
ILI
ITL
IPD
RRST
CIO
ICC
Logical 0 Input Current (Ports 1, 2 and 3)
Input leakage Current
Logical 1 to 0 Transition Current (Ports 1, 2 and 3)
Power Down Current
RST Pulldown Resistor
Capacitance of I/O Buffer
Power Supply Current
Freq = 1 MHz Icc op
Icc idle
Freq = 6 MHz Icc op
Icc idle
Freq ≥ 12 MHz Icc op max = 0.9 Freq (MHz) + 5
Icc idle max = 0.3 Freq (MHz) + 1.7
Freq ≤ 20 MHz Icc op typ = 0.7 Freq (MHz)
Freq ≥ 20 MHz Icc op typ = 0.5 Freq (MHz) + 4
Freq ≤ 20 MHz Icc idle typ = 0.16 Freq (MHz) + 0.4
Freq ≥ 20 MHz Icc idle typ = 0.12 Freq (MHz) + 1.2
Min
Typ (3) Max Unit Test Conditions
– 0.5
0.2 Vcc – 0.1 V
0.2 Vcc + 0.9
0.7 Vcc
Vcc – 0.3
Vcc – 0.7
Vcc – 1.5
Vcc – 0.3
Vcc + 0.5
Vcc + 0.5
0.3
0.45
1.0
0.3
0.45
1.0
V
V
V IOL = 100 µA
V IOL = 1.6 mA (2)
V IOL = 3.5 mA
V IOL = 200 µA
V IOL = 3.2 mA (2)
V IOL = 7.0 mA
V IOH = – 10 µA
V IOH = – 30 µA
V IOH = – 60 µA
VCC = 5 V ± 10 %
V IOH = – 200 µA
Vcc – 0.7
V IOH = – 3.2 mA
Vcc – 1.5
5
50
90
0.7
0.5
4.2
1.4
– 50
± 10
– 650
30
200
10
1.8
1
9
3.5
V IOH = – 7.0 mA
VCC = 5 V ± 10 %
µA Vin = 0.45 V
µA 0.45 < Vin < Vcc
µA Vin = 2.0 V
µA Vcc = 2.0 V to 5.5 V (1)
KW
pF fc = 1 MHz, Ta = 25_C
Vcc = 5.5 V
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
MATRA MHS
9
Rev. E (14 Jan.97)
|
|
Share Link: 