Ordering number : ENN7084A
ExPD (Excellent Power Device)
General Purpose Driver for PDP Sustain Pulse Drive, DC / AC Motor
Drive, Switching Power Supply, and DC / DC Converter Applications
• Dual buffer.
• Monolithic structure(High voltage CMOS process
• Withstand voltage of 25V is assured.
• Wide range of operating voltage : 4.5V to 25V.
• Peak outpout current : 2A.
• Fast switching time(25ns typical at 1000pF load).
• Fully compatible input to TTL/CMOS.
(VIH=not more than 2.6V, at VDD=4.5 to 25V)
Absolute Maximum Ratings at Ta=25°C
unit : mm
0.595 1.27 0.43
1 : NC
2 : IN A
3 : GND
0.2 4 : IN B
5 : OUT B
6 : VDD
7 : OUT A
8 : NC
SANYO : SOP8
Allowable Power Dissipation
0 to 25
GND--0.3 to VDD+0.3
--55 to +150
--55 to +150
Recommended Operating Conditions at Ta=25°C
Operating Supply Voltage
4.5 to 25
--40 to +125
Electrical Characteristics (AC Characteristics) at Ta=25°C, VDD=18V, VIN=5V
Turn-On Rise Time
Turn-Off Fall Time
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
62003 TS IM TA-100713 / O0501 TS IM TA-3491 No.7084-1/4