TLP115A
Switching Characteristics (VCC = 5V, Ta = 25°C)
Characteristic
Propagation delay time (H→L)
Propagation delay time (L→H)
Output rise fall time(10−90%)
Common mode transient
immunity at high output
level
Common mode transient
immunity at low output
level
Symbol
tpHL
tpLH
tr , tf
CMH
CML
Test
Cir-
Test Condition
cuit
1
IF = 0→7.5mA
CL = 15pF, RL = 350Ω
1
IF = 7.5→0mA
CL = 15pF, RL = 350Ω
2
RL = 350, CL = 15pF
IF = 0↔7.5mA
IF = 0 mA,
2 VCM = 400Vp−p, VO(MIN)=2V
RL = 350Ω
IF = 7.5 mA, VCM = 400Vp−p
2 VO(MAX) = 0.8V,
RL = 350Ω
Min. Typ. Max. Unit
―
60 120 ns
―
60 120 ns
―
30
―
ns
1000 ―
― V / μs
−1000 ―
― V / μs
(Note 4) Device considered a two−terminal device: Pins 1 and 3 shorted together, and pins 4, 5 and 6 shorted
together.
(Note 5) The VCC supply voltage to each TLP115A isolator must be bypassed by 0.1μF capacitor. This can be
either a ceramic or solid tantalum capacitor with good high frequency characteristic and should be
connected as close as possible to package VCC and GND pins of each device.
(Note 6) Maximum electrostatic discharge voltage for any pins: 180V(C = 200pF, R = 0)
4
2007-10-01