MBM29F033C View Datasheet(PDF) - Fujitsu

Part Name

Description

Manufacturer

MBM29F033C

FLASH MEMORY CMOS 32M (4M × 8) BIT

Fujitsu 

MBM29F033C-70/-90/-12

s ABSOLUTE MAXIMUM RATINGS

Storage Temperature ........................................................................................–55°C to +125°C

Ambient Temperature with Power Applied ........................................................–40°C to +85°C

Voltage with Respect to Ground All pins except A9, OE, RESET (Note 1)........–2.0 V to +7.0 V

VCC (Note 1) ......................................................................................................–2.0 V to +7.0 V

A9, OE, RESET (Note 2) ...................................................................................–2.0 V to +13.5 V

Notes: 1. Minimum DC voltage on input or l/O pins are –0.5 V. During voltage transitions, inputs may negative

overshoot VSS to –2.0 V for periods of up to 20 ns. Maximum DC voltage on output and l/O pins are VCC

+0.5 V. During voltage transitions, outputs may positive overshoot to VCC +2.0 V for periods of up to 20 ns.

2. Minimum DC input voltage on A9, OE, and RESET pins are –0.5 V. During voltage transitions, A9, OE,

and RESET pins may negative overshoot VSS to –2.0 V for periods of up to 20 ns. Maximum DC input

voltage on A9, OE, and RESET pins are +13.0 V which may positive overshoot to 14.0 V for periods of

up to 20 ns.

WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,

temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.

s RECOMMENDED OPERATING RANGES

Ambient Temperature (TA)

Ambient Temperature for MBM29F033C-70 ................................................... –20°C to +70°C

Ambient Temperature for MBM29F033C-90/-12 ............................................. –40°C to +85°C

VCC Supply Voltages

VCC Supply Voltages for MBM29F033C-70 ..................................................... +4.75 V to +5.25 V

VCC Supply Voltages for MBM29F033C-90/-12 ............................................... +4.50 V to + 5.50 V

Operating ranges define those limits between which the functionality of the device is guaranteed.

WARNING: The recommended operating conditions are required in order to ensure the normal operation of the

semiconductor device. All of the device’s electrical characteristics are warranted when the device is

operated within these ranges.

Always use semiconductor devices within their recommended operating condition ranges. Operation

outside these ranges may adversely affect reliability and could result in device failure.

No warranty is made with respect to uses, operating conditions, or combinations not represented on

the data sheet. Users considering application outside the listed conditions are advised to contact their

FUJITSU representatives beforehand.

23

Share Link: