TL062G-D08-R View Datasheet(PDF) - Unisonic Technologies
Part Name
Description
Manufacturer
TL062G-D08-R Datasheet PDF : 8 Pages
| |||
TL062
LINEAR INTEGRATED CIRCUIT
■ ABSOLUTE MAXIMUM RATINGS (Ta=25°C)
PARAMETER
SYMBOL
RATINGS
UNIT
Supply Voltage (note 2)
VCC
±18
V
Input Voltage (note 3)
Differential Input Voltage (note 4)
VIN
±15
V
VI(DIFF)
±30
V
Power Dissipation
Output Short-Circuit Duration (Note 5)
PD
680
mW
Infinite
Operating Temperature
Storage Temperature
TOPR
TSTG
0 ~ +70
°C
-65 ~ +150
°C
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. All voltage values, except differential voltage, are with respect to the zero reference level (ground) of the
supply voltages where the zero reference level is the midpoint between VCC- and VCC+.
3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 volts,
whichever is less.
4. Differential voltages are at the non-inverting input terminal with respect to the inverting input terminal.
5. The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be
limited to ensure that the dissipation rating is not exceeded.
ELECTRICAL CHARACTERISTICS (VCC=±15V, Ta=25°C, unless otherwise specified)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN TYP MAX UNIT
Input Offset Voltage
Input Common Mode Voltage
Output Voltage Swing
VI(OFF) RS=50Ω
Ta=25°C
TMIN ≤Ta ≤TMAX
3
15 mV
20 mV
VI(CM)
±11 -12~+15
V
Ta=25°C
20
27
V
VO(SW) RL=10kΩ,CL=100pF TMIN ≤Ta ≤TMAX
20
V
Large Signal Voltage Gain
Ta=25°C
3
6
GV
RL=10Ω, VOUT=±10V TMIN ≤Ta ≤TMAX
3
Temperature Coefficient of Input
Offset Voltage
ΔVI(OFF)
RS=50Ω
10
V/mV
V/mV
μV/°C
Supply Current
Input Offset Current*
Input Bias Current*
Gain Bandwidth Product
Input Resistance
Common Mode Rejection Ratio
Supply Voltage Rejection Ratio
Slew Rate
Channel Separation
ICC
II(OFF)
II(BIAS)
GBW
RIN
CMR
SVR
SR
V O1
VO2
Ta=25°C, no load, no signal
Ta=25°C
TMIN ≤Ta ≤TMAX
Ta=25°C
TMIN ≤Ta ≤TMAX
Ta=25°C, RL=10kΩ, CL=100Pf
RS=50Ω
RS=50Ω
VIN=10V, RL=10kΩ, CL=100pF, Gv=1
Gv=100, Ta=25°C
400 500 μA
5 200 pA
5 nA
30 400 pA
10 nA
1
1012
MHz
Ω
70
76
dB
70
95
dB
0.91 1.1
V/μs
120
dB
Total Power Consumption
Ta=25°C, no load, no signal
6
7.5 mW
Rise Time
tR VIN=20mV, RL=10kΩ, CL=100pF, Gv=1
0.2
μs
Overshoot Factor
Kov VIN=20mV, RL=10kΩ, CL=100pF, Gv=1
10
%
Equivalent Input Noise Voltage
eN RS=100Ω, f=1KHz
42
Note: The Input bias currents of a FET-input operational amplifier are normal junction reverse currents, which are
temperature sensitive. Pulse techniques must be used that will maintain the junction temperature as closes to the
ambient temperature as possible.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 8
QW-R105-003,C
|
|
Share Link: 