DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

TEA1102/N3 View Datasheet(PDF) - Philips Electronics

Part Name
Description
Manufacturer
TEA1102/N3
Philips
Philips Electronics Philips
TEA1102/N3 Datasheet PDF : 28 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Philips Semiconductors
Fast charge ICs for NiCd, NiMH, SLA and
LiIon
Preliminary specification
TEA1102; TEA1102T;
TEA1102TS
handbook, full pagPewTDidthprogramming
:1 :2 :4
(GND)
200
(n.c.)
(+VS)
fosc
(kHz)
160
prefered
oscillator
range
(POD = +VS)
12.5
(R23 min)
125
(R23 max)
120
prefered
oscillator
80
range
(POD = n.c.)
C4
(pF)
68
100
150
40
prefered
oscillator
220
range
(POD = GND)
390
560
820
0
1500
0
30
60
90
120
150
180 10
30
50
70
90
110
130
ttime-out (min)
R23 (k)
MGD280
Fig.3 ttime-out as a function of R23 and PTD with C4 as parameter.
LED indication
With few external components, indication LEDs can be
connected to the program pins and the LED pin of the
TEA1102x. These program pins change their function from
an input to an output pin after a short initialization time at
system switch-on or battery insertion. Output pin Vsl
enables the external LEDs to be driven and avoids
interaction with the programming of the dividers during the
initialization period.
The applied LEDs indicate:
Protection
Refresh
Fast charge
100%
No-battery.
The LED output pin can also indicate the charging state by
one single LED. The indication LED can be connected
directly to the LED output. This single LED indicates:
Fast charge (LED on)
100% or refresh (LED off)
Protection or inhibit (LED floating).
The refresh can be indicated by an extra LED connected
to pin 4 (PSD). A buzzer can also be driven from the
TEA1102x to indicate battery insertion end of refresh or full
battery.
AD/DA converter
When battery full is determined by peak voltage detection,
the Vbat voltage is sampled at a rate given by the following
equation:
tsampling ( Vpeak) = 216 × POD × tosc
(8)
The analog value of a Vbat sample is then digitized and
stored in a register. On the following sample, the digitized
value is converted back to the analog value of Vbat and
compared with the ‘new’ Vbat sample.
1999 Jan 27
10
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]