DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

TEA1093 View Datasheet(PDF) - Philips Electronics

Part Name
Description
Manufacturer
TEA1093
Philips
Philips Electronics Philips
TEA1093 Datasheet PDF : 28 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Philips Semiconductors
Hands-free IC
Product specification
TEA1093
Supply: pins SUP, SREF, VBB, GND, VA and PD
As can be seen from Fig.4, the line current is divided
between the speech-transmission circuit (ITR + ICC) and
the TEA1093 circuit (ISUP). It can be shown that:
ISUP = Iline ITR ICC
Where:
ITR = VSUP VSREF/RSREF
VSUP VSREF = 315 mV
RSREF = 100
ICC 1 mA
It follows that ISUP ILINE 4 mA.
The TEA1093 stabilizes its own supply voltage of 3.6 V at
VBB. The voltage on VBB can be adjusted by means of an
external resistor RVA.
When RVA is connected between pin VA and GND, the
voltage on VBB is increased, when connected between
pin VA and VBB, it is decreased. This is shown in Fig.5.
Two capacitors of 4.7 nF (CSREF and CSTAB) are required
to ensure stability of the supply block. When VSUP is
greater than VBB + 0.4 V, the current ISUP is supplied to
VBB via TR1. When VSUP is less, the current is shunted to
GND via TR2, which prevents distortion on the line.
To reduce current consumption during pulse dialling or
register recall (flash), the TEA1093 is provided with a
power-down (PD) input. When the voltage on PD is HIGH,
the current consumption from SUP is 55 µA and from
VBB 400 µA. Therefore a capacitor of 470 µF (CVBB) is
sufficient to power the TEA1093 during pulse dialling.
handbook, full pagewidth
Iline
ISUP
9 SUP
RSREF
100
315 mV
ICC
ITR
7 SREF V V
line
VCC
LN
TEA106X
TEA1093
VEE SLPE
CSREF
4.7 nF
CSTAB
4.7 nF
TR1
TR2
VBB 10
to dynamic
limiter POWER PD 17
DOWN
SWITCH
VOLTAGE
STABILIZER
VA 15 RVA
GND
8
CVBB
470 µF
MGD219
Fig.4 Supply arrangement.
1996 Feb 09
7
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]