TC1263-2.8VET View Datasheet(PDF) - Microchip Technology
Part Name
Description
Manufacturer
TC1263-2.8VET Datasheet PDF : 18 Pages
| |||
TC1263
3.0 PIN DESCRIPTIONS
The descriptions of the pins are listed in Table 3-1.
TABLE 3-1: PIN FUNCTION TABLE
Pin No.
(8-Pin SOIC)
1
2
3
4
5
6
7
8
Pin No.
(5-Pin DDPAK)
(5-Pin TO-220)
5
3
—
1
—
2
—
4
Symbol
Description
VOUT
GND
NC
BYPASS
ERROR
SHDN
NC
VIN
Regulated voltage output
Ground terminal
No connect
Reference bypass input
Out-of-Regulation Flag (open-drain output).
Shutdown control input
No connect
Unregulated supply input
3.1 Regulated Output Voltage (VOUT)
VOUT is a regulated voltage output.
3.2 Ground (GND)
Ground terminal.
3.3 Reference Bypass (BYPASS)
Reference bypass input. Connect a 470 pF to the
BYPASS input to further reduce output noise.
3.4 Out-of-Regulation Flag (ERROR)
Out-of-Regulation Flag (open-drain output). ERROR
goes low when VOUT is out-of-tolerance by
approximately – 5%.
3.5 Shutdown Control (SHDN)
Shutdown control input. The regulator is fully enabled
when a logic-high is applied to SHDN. The regulator
enters shutdown when a logic-low is applied to this
input. During shutdown, output voltage falls to zero and
supply current is reduced to 0.05 µA (typical).
3.6 Unregulated Supply (VIN)
VIN is an unregulated supply input.
DS21374D-page 6
2002-2012 Microchip Technology Inc.
|
|
Share Link: 