DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

STQ-2016-3 View Datasheet(PDF) - Sirenza Microdevices => RFMD

Part Name
Description
Manufacturer
STQ-2016-3
Sirenza
Sirenza Microdevices => RFMD Sirenza
STQ-2016-3 Datasheet PDF : 16 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Product Description
The Sirenza Microdevices STQ-2016-3 is a direct quadrature
modulator targeted for use in W-CDMA applications. This
device features a 700-2500 MHz operating frequency band,
excellent carrier and sideband suppression, and a low broad-
band noise floor.
STQ-2016-3
STQ-2016-3Z Pb RoHS Compliant
& Green Package
700-2500 MHz Direct Quadrature Modulator
The STQ-2016-3 uses silicon germanium (SiGe) device
technology and delivers a typical channel power of -11 dBm
with adjacent channel power less than -65 dBc. A digital
input shut-down feature is included that, when enabled,
attenuates the output by 60 dB. The device is packaged in an
industry standard 16 pin TSSOP with exposed paddle for
superb RF and thermal ground. The STQ-2016-3Z is pack-
aged in a RoHs compliant and Green 16-pin TSSOP with
matte tin finish.
Functional Block Diagram
BBQP 1
16 BBQN
VCC 2
15 VCC
VEE 3
14 VEE
LOP 4
LON 5
LO
QUADRATURE
GENERATOR
13 RFP
12 RFN
VEE 6
11 VEE
16 pin TSSOP with Exposed Ground Pad
Package Footprint: 0.197 x 0.252 inches, (5.0 x 6.4 mm)
Package Height: 0.039 inches (1.0 mm)
Product Features
Excellent carrier feedthrough, -40 dBm constant
with output power
+4.0 dBm output P1dB
Wide baseband input, DC - 500 MHz
Superb phase accuracy and amplitude balance,
±0.5 deg./±0.2 dB
Very low noise floor, -157 dBm/Hz
Low ACP, -65 dBc
SD 7
BBIP 8
10 VCC
9 BBIN
Applications
W-CDMA Transmitters
Product Specifications – W-CDMA Modulation (See Table 1 for Test Conditions)
869-894 MHz
1930-1990 MHz
Parameters
Comments
Unit Min. Typ. Max. Min. Typ. Max.
Channel Power
Guaranteed through
Output Power test as
specified on Page 2
dBm
-13 -11
-9 -14.5 -12.5 -10.5
Power Flatness
Range across fre-
quency band
dB
0.25 0.5
0.25 0.5
Guaranteed through
Adjacent Channel Power IM3 test as specified
dBc
on Page 2
-65 -63
-65 -63
First Alternate Channel
Power
dBc
-75 -68
-73 -68
Second Alternate Channel
Power
dBc
-75 -68
-73 -68
Broadband Noise Floor
60 MHz offset from
carrier
dBm/Hz
-157 -156
-157 -156
Signal-to-Noise Ratio
Noise Offset: 60 MHz,
Measured in a 3.84 MHz
dB
bandwidth
79 81
77 79
2110-2170 MHz
Min. Typ. Max. Type*
-15 -13 -11
E
0.25 0.5 C,D
-65 -63 E
-73 -68 C,D
-73 -68 C,D
-156 -155 C,D
76 78
C,D
*Type Definition: A = 100% tested (see Table 2 for conditions), B = Sample tested, C = Characterized on samples over temperature
and Vcc, D = Design parameter, E = 100% tested through correlated CW parameter, I = Device input specification.
The information provided herein is believed to be reliable at press time. Sirenza Microdevices assumes no responsibility for inaccuracies or ommisions.
Sirenza Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice.
No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Sirenza Microdevices does not authorize or warrant any Sirenza Microdevices product for use in
life-support devices and/or systems.
Copyright 2001 Sirenza Microdevices, Inc. All worldwide rights reserved.
303 South Technology Court Broomfield, CO 80021
Phone: (800) SMI-MMIC
http://www.sirenza.com
1
EDS-104229 Rev B
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]