STA510A13TR View Datasheet(PDF) - STMicroelectronics
Part Name
Description
Manufacturer
STA510A13TR Datasheet PDF : 17 Pages
| |||
STA510A
44-volt, 5.5-amp, quad power half bridge
Features
Multipower BCD technology
Minimum input, output pulse width distortion
150-mΩ RdsON complementary DMOS output
stage
CMOS compatible logic inputs
Thermal protection
Thermal-warning output
Undervoltage protection
Short-circuit protection
Description
STA510A is a monolithic quad half bridge stage in
Multipower BCD Technology. The device can be
used as dual bridge or reconfigured, by
connecting pin CONFIG to VDD, as a single bridge
with double current capability, or as half bridges
(Binary mode) with half current capability.
The device is intended for the output stage of a
stereo all-digital high-efficiency (DDX®) amplifier
which employs a pulse-width modulator driver.
PowerSO36
with exposed pad up (EPU)
The STA510A is capable of delivering an output
power of 50 W into 3 Ω x 4 channels with
THD = 10% at VCC = 37 V in single ended
configuration. It can also deliver 100 W + 100 W
into 6-Ω loads with THD = 10% at VCC = 36 V in
BTL configuration and 200W into 3 Ω with
THD = 10% at VCC = 36 V in single paralleled
BTL configuration.
The input pins have a threshold proportional to
the voltage on pin VL.
Table 1. Device summary
Order code
Operating temp. range
Package
STA510A
0 to 70 °C
PowerSO36 EPU
STA510A13TR
0 to 70 °C
PowerSO36 EPU
Packaging
Tube
Tape and reel
March 2010
Doc ID 11077 Rev 2
1/17
www.st.com
17
|
|
Share Link: 