DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

STA326 View Datasheet(PDF) - STMicroelectronics

Part Name
Description
Manufacturer
STA326 Datasheet PDF : 43 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
STA326
6.4 READ OPERATION
6.4.1 Current Address Byte Read
Following the START condition the master sends a device select code with the RW bit set to 1. The
STA326 acknowledges this and then responds by sending one byte of data. The master then terminates
the transfer by generating a STOP condition.
6.4.1.1Current Address Multi-byte Read
The multi-byte read modes can start from any internal address. Sequential data bytes will be read from
sequential addresses within the STA326. The master acknowledges each data byte read and then gen-
erates a STOP condition terminating the transfer.
6.4.2 Random Address Byte Read
Following the START condition the master sends a device select code with the RW bit set to 0. The
STA326 acknowledges this and then the master writes the internal address byte. After receiving, the in-
ternal byte address the STA326 again responds with an acknowledgement. The master then initiates an-
other START condition and sends the device select code with the RW bit set to 1. The STA326
acknowledges this and then responds by sending one byte of data. The master then terminates the trans-
fer by generating a STOP condition.
6.4.2.1Random Address Multi-byte Read
The multi-byte read modes could start from any internal address. Sequential data bytes will be read from
sequential addresses within the STA326. The master acknowledges each data byte read and then gen-
erates a STOP condition terminating the transfer.
6.5 Write Mode Sequence
Figure 9. I2C Write Procedure
BYTE
WRITE
START
MULTIBYTE
WRITE
START
DEV-ADDR
DEV-ADDR
ACK
RW
ACK
RW
SUB-ADDR
ACK
SUB-ADDR
ACK
DATA IN
DATA IN
ACK
STOP
ACK
DATA IN
ACK
STOP
6.6 Read Mode Sequence
Figure 10. I2C Read Procedure
CURRENT
ADDRESS
READ
START
RANDOM
ADDRESS
READ
START
SEQUENTIAL
CURRENT
READ
START
SEQUENTIAL
RANDOM
READ
START
ACK
DEV-ADDR
DEV-ADDR
RW
ACK
DEV-ADDR
RW
RW= ACK
HIGH
DEV-ADDR
ACK
RW
DATA
SUB-ADDR
DATA
NO ACK
STOP
ACK
DEV-ADDR
START
ACK
DATA
ACK
RW
ACK
SUB-ADDR
ACK
START
DEV-ADDR
ACK
RW
DATA
DATA
DATA
NO ACK
STOP
NO ACK
ACK
STOP
DATA
ACK
DATA
NO ACK
STOP
9/43
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]