Integrated circuits, Transistor, Semiconductors Free Datasheet Search and Download Site


ST7066U View Datasheet(PDF) - Unspecified

Part NameST7066U Unspecified1
Unspecified 
DescriptionDot Matrix LCD Controller/Driver


ST7066U Datasheet PDF : 42 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
ST
Sitronix
ST7066U
Dot Matrix LCD Controller/Driver
n Features
l 5 x 8 and 5 x 11 dot matrix possible
l Low power operation support:
-- 2.7 to 5.5V
l Wide range of LCD driver power
-- 3.0 to 10V
l Correspond to high speed MPU bus
interface
-- 2 MHz (when VCC = 5V)
l 4-bit or 8-bit MPU interface enabled
l 80 x 8-bit display RAM (80 characters max.)
l 13,200-bit character generator ROM for a
total of 240 character fonts(5 x 8 dot or 5 x 11
dot)
l 64 x 8-bit character generator RAM
-- 8 character fonts (5 x 8 dot)
-- 4 character fonts (5 x 11 dot)
n Description
The ST7066U dot-matrix liquid crystal display
controller and driver LSI displays alphanumeric,
Japanese kana characters, and symbols. It can be
configured to drive a dot-matrix liquid crystal display
under the control of a 4- or 8-bit microprocessor.
Since all the functions such as display RAM,
character generator, and liquid crystal driver, required
for driving a dot-matrix liquid crystal display are
internally provided on one chip, a minimal system can
be interfaced with this controller/driver.
The ST7066U character generator ROM is extended
to generate 240 5x8(5x11) dot character fonts for a
l 16-common x 40-segment liquid crystal
display driver
l Programmable duty cycles
-- 1/8 for one line of 5 x 8 dots with cursor
-- 1/11 for one line of 5 x 11 dots & cursor
-- 1/16 for two lines of 5 x 8 dots & cursor
l Wide range of instruction functions:
Display clear, cursor home, display on/off,
cursor on/off, display character blink, cursor
shift, display shift
l Automatic reset circuit that initializes the
controller/driver after power on
l Internal oscillator with external resistors
l Low power consumption
l QFP80 and Bare Chip available
total of 240 different character fonts. The low power
supply (2.7V to 5.5V) of the ST7066U is suitable for
any portable battery-driven product requiring low
power dissipation.
The ST7066U LCD driver consists of 16 common
signal drivers and 40 segment signal drivers which
can extend display size by cascading segment driver
ST7065 or ST7063. The maximum display size can
be either 80 characters in 1-line display or 40
characters in 2-line display. A single ST7066U can
display up to one 8-character line or two 8-character
lines.
Product Name
ST7066U-0A
ST7066U-0B
ST7066U-0E
Support Character
English / Japan
English / European
English / European
V2.2
1/42
2006/05/11
Direct download click here
HOME 'ST7066U' Search

[Sitronix Technology Co., Ltd.]

Description
The ST7066U dot-matrix liquid crystal display controller and driver LSI displays alphanumeric, Japanese kana characters, and symbols. It can be configured to drive a dot-matrix liquid crystal display under the control of a 4-or8-bit microprocessor. Since all the functions such as display RAM, character  generator,  and  liquid  crystal  driver,  required fordriving a dot-matrix liquid crystal display are internally provided on one chip,  a minimal system can be interfaced with this controller/driver.

Features
● 5 x 8 and 5 x 11 dot matrix possible
● Low power operation support:
   -- 2.7 to 5.5V
● Wide range of LCD driver power
   -- 3.0 to 10V
● Correspond to high speed MPU bus
   interface
   -- 2 MHz (when VCC = 5V)
● 4-bit or 8-bit MPU interface enabled
● 80 x 8-bit display RAM (80 characters max.)
● 13,200-bit character generator ROM for a
   total of 240 character fonts(5 x 8 dot or 5 x 11
   dot)
● 64 x 8-bit character generator RAM
   -- 8 character fonts (5 x 8 dot)
   -- 4 character fonts (5 x 11 dot)
● 16-common x 40-segment liquid crystal
   display driver
● Programmable duty cycles
   -- 1/8 for one line of 5 x 8 dots with cursor
   -- 1/11 for one line of 5 x 11 dots & cursor
   -- 1/16 for two lines of 5 x 8 dots & cursor
● Wide range of instruction functions:
   Display clear, cursor home, display on/off,
   cursor on/off, display character blink, cursor
   shift, display shift
● Automatic reset circuit that initializes the
   controller/driver after power on
● Internal oscillator with external resistors
● Low power consumption
● QFP80 and Bare Chip available

Share Link : 

한국어     日本語     русский     简体中文     español
@ 2015 - 2018  [ Home  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]