U62H256ASA55LL View Datasheet(PDF) - Zentrum Mikroelektronik Dresden AG
Part Name
Description
Manufacturer
U62H256ASA55LL Datasheet PDF : 10 Pages
| |||
U62H256A
Characteristics
All voltages are referenced to VSS = 0 V (ground).
All characteristics are valid in the power supply voltage range and in the operating temperature range specified.
Dynamic measurements are based on a rise and fall time of ≤ 5 ns, measured between 10 % and 90 % of VI, as well as
input levels of VIL = 0 V and VIH = 3 V. The timing reference level of all input and output signals is 1.5 V,
with the exception of the tdis-times and ten-times, in which cases transition is measured ±200 mV from steady-state voltage.
Absolute Maximum Ratings a
Symbol
Min.
Max.
Unit
Power Supply Voltage
VCC
Input Voltage
VI
Output Voltage
VO
Power Dissipation
PD
Operating Temperature
K-Type
Ta
A-Type
-0.5
7
V
-0.5
VCC + 0.5 b
V
-0.5
VCC + 0.5 b
V
-
1
W
-40
85
°C
-40
125
Storage Temperature
Output Short-Circuit Current
at VCC = 5 V and VO = 0 V c
Tstg
-65
| IOS |
150
°C
200
mA
a Stresses greater than those listed under „Absolute Maximum Ratings“ may cause permanent damage to the device. This is a stress rating only,
and functional operation of the device at condition above those indicated in the operational sections of this specification is not implied. Exposure
to absolute maximum rating conditions for extended periods may affect reliability
b Maximum voltage is 7 V
c Not more than 1 output should be shorted at the same time. Duration of the short circuit should not exceed 30 s.
Recommended
Operating Conditions
Power Supply Voltage
Input Low Voltage d
Input High Voltage
d -2 V at Pulse Width 10 ns
Symbol
VCC
VIL
VIH
Conditions
Min.
4.5
-0.3
2.2
Max.
Unit
5.5
V
0.8
V
VCC + 0.3
V
April 20, 2004
3
|
|
Share Link: 