DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

SMP1304-005LF View Datasheet(PDF) - Skyworks Solutions

Part Name
Description
Manufacturer
SMP1304-005LF Datasheet PDF : 6 Pages
1 2 3 4 5 6
DATA SHEET
SMP1304 Series: Low-Distortion Attenuator
Plastic Packaged PIN Diodes
Features
Low-distortion design
Frequency range from HF to > 2 GHz
Designed for base station applications
Configured for PI and TEE attenuators
Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 °C(1)
per JEDEC J-STD-020
Description
The SMP1304 series of plastic packaged, surface mountable, low
capacitance (0.3 pF), silicon PIN diodes is designed for use in
attenuator applications from 5 MHz to beyond 2 GHz. The thick
100 µm I region of these PIN diodes makes them very attractive
for use in low-distortion PI and TEE attenuators commonly used
in TV distribution applications. The 1 µs typical carrier lifetime of
these diodes results in resistance of 20 maximum at 1 mA and
7 maximum at 10 mA. Available in a selection of plastic pack-
ages: as a single diode in the small footprint SOD-323 package
and in a variety of configurations in the SOT-23 package,
including a low inductance (0.4 nH) SMP1304-007 package.
Also available in the SOT-143 package are three diode junctions
designed for insertion in TEE attenuators (SMP1304-018) and PI
attenuators (SMP1304-019). Also available in a SOT-5
(SMP1304-027) package as a four-diode array designed for
insertion in the commonly used four-diode PI attenuator circuit.
NEW Skyworks offers lead (Pb)-free, RoHS (Restriction of
Hazardous Substances)-compliant packaging.
Absolute Maximum Ratings
Characteristic
Value
Reverse voltage (VR)
Power dissipation @ 25 °C lead
temperature (PD)
Storage temperature (TST)
Operating temperature (TOP)
ESD human body model
200 V
250 mW
-65 °C to +150 °C
-65 °C to +150 °C
Class 1C
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
CAUTION: Although this device is designed to be as robust as
possible, ESD (Electrostatic Discharge) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce poten-
tials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.
1. SOT-5 (-027) MSL to be defined.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200044 Rev. C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • February 23, 2006
1
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]