Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

SCA1000-D01 View Datasheet(PDF) - Murata Manufacturing

Part NameDescriptionManufacturer
SCA1000-D01 PRODUCT SPECIFICATION FOR XY-DUAL AXIS ACCELEROMETER Murata
Murata Manufacturing Murata
SCA1000-D01 Datasheet PDF : 18 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
2.1.1 Recommended connection when SPI interface is used
Serial Clock
SCK 1
NC 2
X
Vdd (+5V)
12 VDD
11 OUT_1
Min 100n
F
Data Out
MISO 3
10 ST_1
Data In
MOSI 4
OUT_2 5
9 ST_2
Y
8 NC
VSS 6
7 CSB
Chip select
SCA1000-D01
Recommended SPI-Output connection on PCB
2.1.2 Recommended connection when analog output is used
When SCA1020 is used in Analog mode and the PCB is designed correctly the SCA610 / 620 and
SCA1020 are interchangeable. If the PCB layout is designed for SCA1020, then SCA610 / 620 can
be used for single axis applications. Pins 1, 2, 3, 4 and 8 can be connected to GND (pins 2 and 8
can be connected also to Vdd) but for the best EMC performance these pins should be left floating.
CSB pin can be pulled up but it is recommended to left floating. The output of SCA610 / 620
corresponds to the output of channel 1 in the SCA1020
Out 2 (Y)
SCK 1
NC 2
MISO 3
MOSI 4
OUT_2 5
VSS 6
Vdd (+5V)
12 VDD
Min 100nF
Z
11 OUT_1
Out 1 (Z)
10 ST_1/Test_i
n
9 ST_2
Y
8 NC
Self-Test 1
Self-Test 2
7 CSB
Recommended Analog output connection on PCB
SCA610 or SCA620 connected
to the SCA1020 lay-out
Murata Electronics Oy
www.muratamems.fi
Doc. Nr. 8225700
5/18
Rev.C
Direct download click here

 

Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2019  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]