Integrated circuits, Transistor, Semiconductors Free Datasheet Search and Download Site

SA43CA-T View Datasheet(PDF) - Littelfuse, Inc

Part NameSA43CA-T Littelfuse
Littelfuse, Inc Littelfuse
Description500 Watt Axial Leaded Transient Voltage Suppressors


SA43CA-T Datasheet PDF : 4 Pages
1 2 3 4
Silicon Avalanche Diodes
500 Watt Axial Leaded Transient Voltage Suppressors
RoHS SA Series
®
The SA Series is designed specifically to protect sensitive
electronics equipment from voltage transients induced by
lightning and other transient voltage events. These devices are
ideal for the protection of I/O interfaces, Vcc bus and other
vulnerable circuits used in computer and consumer electronic
applications.
FEATURES
RoHS Compliant
5.0 to 180 Volts
Uni-directional and Bi-directional
Glass passivated chip junction
500W peak pulse power capability on 10/1000µs waveform
Excellent clamping capability
Repetition rate (duty cycle): 0.01%
Low incremental surge resistance
Fast response time: typically less than 1.0ps from 0 Volts to
BV for unidirectional and 5.0ns for bidirectional types
Typical IR less than 1µA above 10V
High temperature soldering guaranteed: 265˚C/10
seconds/.375",(9.5mm) lead length, 5lbs.,(2.3kg) tension
Agency Approvals: Recognized under the Components
Program of Underwriters Laboratories.
Agency File Number: E128662
MAXIMUM RATINGS AND CHARACTERISTICS @25˚C
AMBIENT TEMPERATURE (unless otherwise noted)
RATING
SYMBOL
Peak Pulse Power Dissipation on
10/1000µs waveform(Note 1, FIG. 1)
PPPM
Peak Pulse Current of on 10/1000µs
waveform (Note 1, FIG. 3)
IPPM
Steady State Power Dissipation at
TL=75˚C, Lead lengths .375",
(9.5mm)(Note 2)
PM(AV)
VALUE
Min
500
SEE
TABLE 1
3
UNIT
Watts
Amps
Watts
Peak Forward Surge Current, 8.3ms
Single Half Sine-Wave Superimposed IFSM
70
on Rated Load, (JEDEC Method)
(Note 3)
Operating junction and Storage
Temperature Range
Tj, TSTG -55 to +175
Amps
°C
ORDERING INFORMATION
SA
CA
Voltage
Bi-Directional
5% Voltage Tolerance
Packing Option
B = Bulk (1000 pcs)
T = Tape and reeled (4000 pcs)
286
Notes:
1. Non-repetitive current pulse, per Fig.3 and derated above
TA= 25˚C per Fig.2
2. Mounted on Copper Pad area of 1.6x1.6"(40x40mm)
per Fig.5.
3. 8.3 ms single half sine-wave, or equivalent square wave, Duty
cycle= 4 pulses per minutes maximum.
Mechanical Specifications:
Weight:
0.015 ounce, 0.4 gram
Case:
JEDEC DO-15 Molded Plastic over
passivated junction
Mounting Position: Any
Polarity:
Color band denotes cathode except
Bidirectional
Terminal:
Plated Axial leads, solderable per
MIL-STD-750, Method 2026
www.littelfuse.com
Direct download click here
HOME 'SA43CA-T' Search

The SA Series is designed specifically to protect sensitive electronics equipment from voltage transients induced by lightning and other transient voltage events. These devices are ideal for the protection of I/O interfaces, Vcc bus and other vulnerable circuits used in computer and consumer electronic applications.


FEATURES
•RoHS Compliant
• 5.0 to 180 Volts
• Uni-directional and Bi-directional
• Glass passivated chip junction
• 500W peak pulse power capability on 10/1000µs waveform
• Excellent clamping capability
• Repetition rate (duty cycle): 0.01%
•Low incremental surge resistance
•Fast response time: typically less than 1.0ps from 0 Volts to BV for unidirectional and 5.0ns for bidirectional types
•Typical IR less than 1µA above 10V
•High temperature soldering guaranteed: 265˚C/10 seconds/.375",(9.5mm) lead length, 5lbs.,(2.3kg) tension

Share Link : Littelfuse

한국어     日本語     русский     简体中文     español
@ 2015 - 2018  [ Home  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]