S-1000N17-M5T1G View Datasheet(PDF) - Seiko Instruments Inc

Part Name

Description

Manufacturer

S-1000N17-M5T1G

Ultra Small Package High Precision Voltage Detector

Seiko Instruments Inc 

Rev.2.3_00

ULTRA-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR

S-1000 Series

„ Precautions

• If the input impedance is high, oscillation may occur due to the through-type current etc. In COMS output products,

impedance should not be connected to the input pin. In Nch open drain output products, input impedance is

recommended to be 800 Ω or less. However be sure to perform sufficient evaluation under the actual usage conditions for

selection, including evaluation of temperature characteristics.

• In CMOS output products oscillation may occur when a pull-down resistor is used, and falling speed of the power supply

voltage (VDD) is slow near the detection voltage.

• When designing for mass production using an application circuit described herein, the product deviation and temperature

characteristics should be taken into consideration. SII shall not bear any responsibility for the products on the circuits

described herein.

• Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic

protection circuit.

• SII claims no responsibility for any and all disputes arising out of or in connection with any infringement of the products

including this IC upon patents owned by a third party.

Seiko Instruments Inc.

17

Share Link: