RP15-1215DFP View Datasheet(PDF) - RECOM Electronic GmbH
Part Name
Description
Manufacturer
RP15-1215DFP Datasheet PDF : 4 Pages
| |||
POWERLINE
DC/DC-Converter
RP15-S_DF
Series
Specifications (typical at nominal input and 25°C unless otherwise noted)
Output Voltage Accuracy (full Load and nominal Vin)
±1%
Minimum Load (see Note 1)
10% of full load
Line Regulation (low line, high line at full load)
±1%
Load Regulation (25% to 100% full load)
Single
±1%
Dual
±2%
Cross Regulation (asymmetrical load 25%/100% full load)
±5%
Ripple and Noise (20MHz bandwith)
Single
Dual
50mVp-p
75mVp-p
Temperature Coefficient
±0.02%/°C max.
Transient Response (25% load step change)
500µs
Over Voltage Protection
3.3V
3.9V
Zener diode clamp (only single)
5V
6.2V
12V
15V
15V
18V
Over Load Protection (% of full load at nominal Vin)
150% typ
Short Circuit Protection
Hiccup, automatic recovery
Efficiency
see „Selection Guide“ table
Isolation Voltage
1600VDC min.
Isolation Resistance
1 GΩ min.
Isolation Capacitance
300pF max.
Operating Frequency
Single
Dual
500kHz typ.
300kHz typ.
Approved to Safety Standards
UL 1950, EN60950
Operating Temperature Range
-40°C to +85°C(with derating)
Maximum Case Temperature
+100°C
Storage Temperature Range
-55°C to +105°C
Thermal Impedance
(see Note 8)
Natural convection
Natural convection with Heat Sink
12°C/Watt
10°C/Watt
Thermal Shock
MIL-STD-810D
Vibration
10-55Hz, 2G, 30 Min. along X, Y and Z
Relative Humidity
5% to 95% RH
Case Material
Nickel plated copper
Base Material
Non-conductive black plastic
Potting Material
Epoxy (UL94-V0)
Conducted Emissions (see Note 9)
Radiated Emissions
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Level A
Level A
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
continued on next page
242
July-2006
www.recom-international.com
|
|
Share Link: 