ZPSD503B1-C-90LI View Datasheet(PDF) - STMicroelectronics
Part Name
Description
Manufacturer
ZPSD503B1-C-90LI Datasheet PDF : 153 Pages
| |||
6.0
Design Flow
PSD5XX Family
Shown in Figure 3 (below) is the software design flow for a PSD5XX device.
PSDsoft—WSI’s software development suite—is used throughout the design phase. You
start with a design file that is written in PSDabel-a high-level hardware description language
(HDL). Before you compile your design, you must also configure the PSD5XX so it knows
what signals to expect from your microprocessor and what pre-runtime options should be
set (such as the security bit).
Once you have a design file and have configured the device, you are ready to run the Fitter
and Address Translator. The Fitter accepts input from PSDabel and PSD Configuration,
synthesizes this user logic and configuration, and fits the design to the PSD silicon.
The Address Translator process allows the user to map the MCU firmware from a
cross-compiler (in Intel HEX or S-Record format) into the NVM memory blocks within the
PSD. As a result, the MCU firmware is merged with the logic and configuration definition of
the PSD.
The output of the Address Translator and the Fitter is the required object file that is used by
a programmer to program the PSD device. The object file includes chip configuration, the
PLD fusemap, and MCU firmware information.
PSDsilosIII is an optional program that provides functional chip-level simulation of the
PSD5XX. PSDsoft automatically creates files for input to the simulator. These files convey
relevant design information to the simulator. As a result, the user only has to create a stim-
ulus file since all of the signals and node names are taken from the design file.
Figure 3. PSDsoft Development Tools
PSDsoft
Development Software
PSDabel™
ZPLD DESCRIPTION
(STATE MACHINE, DECODING)
PSD Configuration
CHIP CONFIGURATION
CODE FILE
PSD Compiler
(ZPLD FITTING, ADDRESS TRANSLATION)
THIRD PARTY
PROGRAMMERS
PSDsilos III™
SILOSIII
CHIP SIMULATION
PSD Programmer
PSDpro/MagicPro®
CHIP PROGRAMMING
7
|
|
Share Link: 