DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

MC-4516CB646EF-A10 View Datasheet(PDF) - Elpida Memory, Inc

Part Name
Description
Manufacturer
MC-4516CB646EF-A10 Datasheet PDF : 16 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
MC-4516CB646
DC Characteristics (Recommended Operating Conditions Unless Otherwise Noted)
Parameter
Symbol
Test condition
Grade MIN. MAX. Unit Notes
Operating current
ICC1 Burst length = 1
/CAS latency = 2 -A80
800 mA 1
tRC tRC(MIN.), IO = 0 mA
-A10
800
/CAS latency = 3 -A80
800
Precharge standby current in ICC2P CKE VIL(MAX.), tCK = 15 ns
power down mode
ICC2PS CKE VIL(MAX.), tCK =
Precharge standby current in ICC2N CKE VIH(MIN.), tCK = 15 ns, /CS VIH(MIN.),
non power down mode
Input signals are changed one time during 30 ns.
E ICC2NS CKE VIH(MIN.), tCK =
Input signals are stable.
Active standby current in
ICC3P CKE VIL(MAX.), tCK = 15 ns
Opower down mode
ICC3PS CKE VIL(MAX.), tCK =
Active standby current in
ICC3N CKE VIH(MIN.), tCK = 15 ns, /CS VIH(MIN.),
non power down mode
Input signals are changed one time during 30 ns.
LICC3NS CKE VIH(MIN.), tCK =
-A10
800
8 mA
8
160 mA
64
40 mA
32
240 mA
160
Operating current
(Burst mode)
P CBR (Auto) refresh current
r Self refresh current
o Input leakage current
Output leakage current
High level output voltage
d Low level output voltage
Input signals are stable.
ICC4 tCK tCK(MIN.)
/CAS latency = 2 -A80
960 mA 2
IO = 0 mA
-A10
760
/CAS latency = 3 -A80
1,160
-A10
1,000
ICC5 tRC tRC(MIN.)
/CAS latency = 2 -A80
1,840 mA 3
-A10
1,840
/CAS latency = 3 -A80
1,840
-A10
1,840
ICC6 CKE 0.2 V
16 mA
II(L) VI = 0 to 3.6 V, All other pins not under test = 0 V
– 8 + 8 µA
IO(L) DOUT is disabled, VO = 0 to 3.6 V
– 1.5 + 1.5 µA
VOH IO = – 4.0 mA
2.4
V
VOL IO = + 4.0 mA
0.4 V
Notes 1. ICC1 depends on output loading and cycle rates. Specified values are obtained with the output open. In
addition to this, ICC1 is measured on condition that addresses are changed only one time during tCK (MIN.).
u 2. ICC4 depends on output loading and cycle rates. Specified values are obtained with the output open. In
addition to this, ICC4 is measured on condition that addresses are changed only one time during tCK (MIN.).
ct 3. ICC5 is measured on condition that addresses are changed only one time during tCK (MIN.).
6
Data Sheet E0059N10
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]