Integrated circuits, Transistor, Semiconductors Free Datasheet Search and Download Site


MAX6723AUTTGD2-T View Datasheet(PDF) - Maxim Integrated

Part NameMAX6723AUTTGD2-T MaximIC
Maxim Integrated MaximIC
DescriptionDual/Triple, Ultra-Low-Voltage, SOT23 µP Supervisory Circuits
MAX6723AUTTGD2-T Datasheet PDF : 18 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Dual/Triple, Ultra-Low-Voltage, SOT23 µP
Supervisory Circuits
ELECTRICAL CHARACTERISTICS (continued)
(VCC1 = 0.8V to 5.5V, VCC2 = 0.8V to 5.5V, GND = 0V, TA = -40°C to +125°C, unless otherwise noted. Typical values are at TA =
+25°C.) (Note 1)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX
RESET/POWER-FAIL OUTPUTS
VCC1 or VCC2 0.8V, ISINK = 1µA,
output asserted
0.3
VCC1 or VCC2 1.0V, ISINK = 50µA,
output asserted
0.3
RST/RST1/RST2/PFO
Output LOW
(Push-Pull or Open-Drain)
VOL
VCC1 or VCC2 1.2V, ISINK = 100µA,
output asserted
0.3
VCC1 or VCC2 2.7V, ISINK = 1.2mA,
output asserted
0.3
RST/RST1/PFO
Output HIGH
(Push-Pull Only)
VCC1 or VCC2 4.5V, ISINK = 3.2mA,
0.4
output asserted
VCC1 1.8V, ISOURCE = 200µA, output not
asserted
0.8 VCC1
VOH
VCC1 2.7V, ISOURCE = 500µA, output not
asserted
0.8 VCC1
VCC1 4.5V, ISOURCE = 800µA, output not
asserted
0.8 VCC1
RST2
Output HIGH
(Push-Pull Only)
RST
Output HIGH
(Push-Pull Only)
VOH
VOH
VCC1 1.8V, ISOURCE = 200µA, output not
asserted
VCC1 2.7V, ISOURCE = 500µA, output not
asserted
VCC1 4.5V, ISOURCE = 800µA, output not
asserted
VCC1 1.0V, ISOURCE = 1µA, reset asserted
VCC1 1.8V, ISOURCE = 150µA,
reset asserted
VCC1 2.7V, ISOURCE = 500µA,
reset asserted
0.8 VCC2
0.8 VCC2
0.8 VCC2
0.8 VCC1
0.8 VCC1
0.8 VCC1
VCC1 4.5V, ISOURCE = 800µA,
reset asserted
0.8 VCC1
VCC1 or VCC2 1.8V, ISINK = 500µA,
reset not asserted
0.3
RST
Output LOW
(Push-Pull or Open Drain)
VOL
VCC1 or VCC2 2.7V, ISINK = 1.2mA,
reset not asserted
0.3
VCC1 or VCC2 4.5V, ISINK = 3.2mA,
0.4
reset not asserted
RST/RST1/RST2/PFO Output
Output not asserted
0.5
Open-Drain Leakage Current
RST Output Open-Drain
Leakage Current
Output asserted
0.5
Note 1: Devices tested at TA = +25°C. Overtemperature limits are guaranteed by design and not production tested.
Note 2: Parameter guaranteed by design.
UNITS
V
V
V
V
V
µA
µA
4 _______________________________________________________________________________________
Direct download click here
 
Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2018  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]