Udenvdeelropment
Preliminary Specifications Rev.1.0
Specifications in this manual are tentative and subject to change.
1.13 Precautions for Programmable I/O Ports
Mitsubishi microcomputers
M16C / 62P Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
1.13 Precautions for Programmable I/O Ports
_______
1. If a low-level signal is applied to the NMI pin when the TB2SC register IVPCR1 bit = “1” (three-phase
_______
output forcible cutoff by input on NMI pin enabled), the P72 to P75, P80 and P81 pins go to a high-imped-
ance state.
39